Luoyang Yuboo Testing Technology Co., Ltd.
PRODUCTS CENTER
This instrument is mainly used for automatic core shooting preparation of various laminated sand bending and tensile standard samples. It consists of core shooting machine, sample mold, touch screen electronic control system, intelligent temperature control system and other components. The instrument adopts high-precision intelligent temperature controller to precisely control the heating mold without contact, so that the sample is heated evenly. It has digital timing and alarm prompts. The instrument can start automatic core shooting with one click, which is easy to operate and effectively ensures the stability of the strength value of each batch of samples.
This instrument is mainly used for automatic core shooting preparation of various laminated sand bending and tensile standard samples. It consists of core shooting machine, sample mold, touch screen electronic control system, intelligent temperature control system and other components. The instrument adopts high-precision intelligent temperature controller to precisely control the heating mold without contact, so that the sample is heated evenly. It has digital timing and alarm prompts. The instrument can start automatic core shooting with one click, which is easy to operate and effectively ensures the stability of the strength value of each batch of samples.
Compared with traditional contact thermometers, it has the advantages of fast temperature response, high accuracy, no contact, and no consumables. It is widely used in chemical industry, environmental testing, heating and refrigeration, non-destructive testing and other industries.
The rapid temperature measurement thermocouple is used to measure the temperature of molten steel and high-temperature molten metal. It is a disposable consumable thermocouple. Its working principle is based on the thermoelectric effect of metal, using the temperature difference generated at both ends of the thermocouple to electrically measure the temperature of molten steel and high molten metal. The fast thermocouple is mainly composed of a temperature measuring head and a large paper tube. The couple head mainly has positive and negative couple wires welded to the compensation wire. The compensation wire is embedded in the bracket. The bracket is covered with a small paper tube. The couple wires are supported and protected by quartz. An anti-slag cap is installed on the outside, and all components are put into the mud head and bonded into a whole body with refractory filler. It cannot be disassembled, so it is a one-time use.