CIC-D160+ Lon Chromatography System-Yuboo Detection Technology Co., Ltd.

CIC-D160+ Lon Chromatography System

Automatic range conductivity detector, ppb-ppm concentration range signal direct expansion, no need to adjust the range.
With pressure alarm, leakage alarm and eluent early warning functions, it can protect the safe operation of the instrument in real time.
Real-time monitoring of suppressor and column operation data, clear status of consumables.
Gas-liquid separator, which can effectively remove the influence of bubbles on the test.
With Shenghan high-performance automatic sampler, the injection control is more precise.
Intelligent software algorithm, lower baseline noise, more accurate small peak identification.
Intelligent software algorithm, lower baseline noise, more accurate small peak identification.
Intelligent software has a baseline subtraction algorithm to effectively remove the baseline drift caused by gradient elution.
Reagent-free technology, online generation of eluent, achieving isocratic or gradient elution.
Built-in low-pressure degassing module to remove gas interference in the eluent, making the baseline more stable.
Lifetime warranty for the whole machine, setting a new benchmark for industry services and making it easier to use.

Details

High-pressure advection pump
Flow range	0.01 -9.99 mL/min
Pressure display accuracy	≤0.1Mpa
Flow setting error	±0.1%
Maximum withstand voltage	42MPa
Traffic stability	≤0.1%
Pressure pulsation	≤1%
Conductivity detector
Baseline noise	≤0.002μS/cm
Baseline drift	≤0.008μS.cm-1/30min
Minimum detectable concentration	≤0.0005μg/mL（Cl-） ≤0.0005μg/mL（Li+）/td>
Linear coefficient	≥0.999
Qualitative repeatability	≤0.1%
Quantitative repeatability	≤0.1%
Built-in eluent generator
Type of lotion	KOH/methane sulfonic acid
Flow rate range:	0.1~5.0mL/min
Concentration increment:	0.1mM
Column oven
Column temperature control range	Ambient temperature: +5-85℃
Allowable error of column temperature setting value	±1℃
Suppressor
Inhibitory capacity	200μeq/min (anion)
Dead volume	100μeq/min (cation) ＜40μL
Autosampler
Sample size	120 positions
Maximum sample injection volume	≥500μL
Injection method	Full quantitative loop/partial quantitative loop/lossless sample introduction
Sample injection repeatability	Fully quantitative loop injection: RSD≤0.4%; Partial quantitative loop injection: RSD ≤ 0.5%; Lossless injection: RSD≤1.0%