Luoyang Yuboo Testing Technology Co., Ltd.
ICP700T PRO Inductively Coupled Plasma Optical Emission Spectrometer
-
The radio frequency power supply used in the instrument has small size, high output efficiency, stable output power, and various safety protection functions such as water circuit, gas circuit and overload, which greatly improves the safety of the instrument and reduces the failure rate of the instrument.
-
The software can automatically ignite with one button, and all parameter setting changes are completed automatically. With advanced automatic matching technology, the ignition success rate is high and the operation is simple.
-
The instrument is equipped with a highly sensitive optical fiber sensor, which can monitor the working condition of the flame in real time when the instrument is working. In case of abnormal flameout, the instrument can be automatically shut down.
-
The instrument is equipped with an imported grating with a higher resolution of 4320 lines. With the unique patented optical path adjustment technology, the resolution of ordinary instruments is reduced from about 0.008NM to within 0.005NM. The higher resolution ensures that there is no mutual interference between the test elements.
-
The instrument is equipped with a high-sensitivity imported photomultiplier tube (PMT) as a detector, which can automatically set the best test parameters for different elements to be tested to achieve the ideal detection state and give accurate test results. No refrigeration or purge required, long service life.
-
The instrument adopts a two-dimensional mobile platform design. The position of the torch can be adjusted in real time through the software. The optimal observation position can be found through the feedback signal value to obtain stronger sensitivity and accurate test results.
| Input Power | Voltage AC 220V, current 20A |
| Optical path type | Adopt Czerny Turner type optical path, focal length is 1000mm |
| Grating | Ion-etched holographic grating, ruled area (80x110) mm |
| Wavelength range | 190-460nm (4320 line grating); 190-500nm (3600 line grating); 190-800nm (2400 line grating); |
| Atomizer | High-precision and high-efficiency concentric atomizer 2ml/min, can be equipped with a variety of injection systems such as high salt resistance, hydrofluoric acid resistance, and organic resistance. |
| Spray chamber | The patented extended double-barrel atomization chamber has a better solvent removal effect. |
| Total argon consumption | Less than 14 U/min |
| Replacement tooling | Quick-change injection system, using patented torch tooling and torch installation platform |
| Stability | 2 hours RSD < 2.0% |
| Power supply features | Possess RF power reverse power protection (patented technology) |
| Precision | 2ppm mixed multi-element solution, RSD |
| Detection Limit | Meet the national standard A level requirements |
| Spectral flexibility | Test spectrum lines can be added arbitrarily according to usage requirements |
PRODUCT VIDEO
ATTACHED FIGURE
RELATED MACHINES
YB-810 Desktop Direct-Reading Spectrometer
YB-810 adopts a number of innovative technologies to meet the production needs of customers in multiple industries such as smelting, automobiles, aerospace, and consumer goods. Full spectrum direct reading spark spectrometer can quickly analyze solid metal samples. Whether it is trace elements or high-concentration elements, reliable analysis results can be obtained.
YB-610 Desktop Direct Reading Spectrometer
YB-610 desktop spectrometer can be used for elemental quantitative analysis and brand identification of solid metal samples. The optical system uses CCD (optional CMOS) detector, the spectral range covers typical ferrous and non-ferrous metal materials, a new digital light source, and the instrument is equipped with an argon flushing spark stand. The open spark stand is suitable for sample analysis of different shapes and sizes.
YB-6600 Mobile Direct-Reading Spectrum Analyzer
The YB-6600 portable direct-reading spectrometer is based on the optical system of a laboratory fixed spectrometer, but has been specially improved and upgraded into a portable spectrometer. This instrument inherits the stable data performance of the fixed spectrometer, can detect multiple elements, and is easy to operate with stable and reliable performance. Each component in the optical system (such as the grating detector) is securely fixed and protected using special processes, making the instrument dustproof, shock-resistant, and durable. The instrument uses a high-end ARM processor, and the detector response time is controlled within 3 milliseconds. High-quality hardware design provides strong support for the performance of the YB-6600, giving it the advantages of rapid analysis and efficient detection.
YB-9600 Direct reading spectrometer
The YB-9600 direct reading spectrometer, with its high performance and reliable design, as well as innovative optical system and extended wavelength range, ensures precise identification and trace analysis of important elements. The instrument has a very low detection limit and excellent long-term stability; the analysis results are accurate and the reproducibility is good. By combining optical detectors with digital reading technology, the overall design of the instrument is superior to the traditional photomultiplier tube technology, and has gradually become the ideal choice for the metal manufacturing, processing and casting industries. The detection wavelength range of the YB-9600 direct reading spectrometer is extensive, and it is in the leading position in the full-spectrum detection field from the detection lower limit to the detection upper limit.
WAW-1000D Microcomputer Controlled Electro Hydraulic Servo Hydraulic Universal Testing Machine
The WDW-100 microcomputer controlled electronic universal testing machine is manufactured according to the GB/T2611-2007 "General Technical Requirements for Testing Machines" and GB/T 16491-1996 "Electronic Universal Testing Machines" standards. Applicable standards: National standards, ASTM, and other domestic and international standards. This machine has a beautiful appearance, easy operation, stable and reliable performance.
JB-300B Pendulum Impact Testing Machine
This JB series impact testing machine is developed strictly in accordance with the national standard GB/T3808-2002 "Inspection of Pendulum Impact Testing Machines". It conducts impact testing on metal materials according to the national standard GB/T229-2020 "Charpy Notch Impact Test Method for Metals" and undergoes factory inspection according to JJG145-82 "Pendulum Impact Testing Machines". The cross-sectional area used is 10 * 10MM. It is mainly used for testing black metals with high impact toughness, especially steel and its alloys.
SWY-II digital universal strength test for molding sand Testing equipment
This instrument has four levels of compression resistance, shear resistance, bending resistance, and tensile resistance, and directly displays real-time and maximum force values digitally.
Messages