WL15A Pro Full Spectrum Spark Direct Reading Spectrometer-Yuboo Detection Technology Co., Ltd.

WL15A Pro Full Spectrum Spark Direct Reading Spectrometer

The instrument can continue to work normally in any harsh environment, from the laboratory to the furnace site, or even more harsh environments.
Adopt ARM chip high-speed USB multi-channel synchronous data acquisition, 16*100k synchronous sampling.
Full-frequency digital excitation light source: excitation frequency 100-1000Hz.
Flow meter pressure adjustment: input pressure, 0.25MPa.
Intermittent vacuum control device: vacuum for 3-5 minutes and can be maintained for >3 hours, ensuring that the optical chamber is in a high-sensitivity state all year round and avoiding oil and gas pollution.

Details

Project	index
Detection matrix	Various substrates suchas Fe,Al,Cu,Zn,Ni,Mg,Ti,Co,Sn,Pb,Ag etc
Detection time	Depends on the type of sample,generally 10-30s
Detector	16 high-precision CCDs
Optical system	Pa-type -Runge structure,Roland grating;
Wavelength range	120～800nm:
Focal length	400mmm
Air system	Dual air path four nozzle air path system with built-in flow meter
Light source system	Full-frequency digital double-pulse excitation light source,variable frequency(100-1000Hz)excitation technology,double spark combined discharge:more stable sample excitation;
Working humidity	20%～80%
Readout system	Power pre-filter circuit,high-speed 16-bit ADC analog-to-digital conversion,FPGA digital signal controller,industrial USB data acquisition (200KHz/s),ultra-high-speed multi-channel synchronous digital collector,3.2 million times/s,with analog optical isolation,analog digital integration,single spark signal acquisition,with refrigeration,witil intelligent detection (real-time monitoring of the working status of each link)
Inspire platfom	The whole is made of wear-resistant and corrosion-resistant Cr stainless steel material,and the argon gas is excited by the intelligent air pressure protection device
Excitation stage aperture	13mm
Argon Purity Requirements	100.00%
Argon inlet pressure	0.5MPa
Argon flow	The excitation flow is about 3.5L/min
Excite maximum power	600W
Standby average power	100W
Size	880(L)×720(D)×410(H)
Weight	95 kg
Working power	220V±10%,50Hz;spark excitation maximum power.200-1000VA;10A slow blow fuse