XRF handheld analyzer (ore model)-Yuboo Detection Technology Co., Ltd.

XRF handheld analyzer (ore model)

1. Personalized customized working mode Multiple ore sample modes to choose from and unlimited number of modes to add freely, customized working mode according to customer needs.
2. Fully tap the value of the mine High-definition camera can observe the detected ore vein or ore point more intuitively, and accurately manage and control the mining process, and detect the ore grade at any time.
3. Accurate and rapid analysis of raw ore, concentrate and tailings in the mineral processing process Provide value judgment basis for ore grade determination, mineral trade, processing and reuse.
4. Environmental monitoring Monitor and detect heavy metals in the soil around the mining mine, evaluate the restoration of the mine environment, and monitor the environment around the mine to the maximum extent

Details

Main configuration	1. 1 set of ore analyzer host; 2. 1 standard sample; 3. 2 original rechargeable carp batteries; 4. Charging stand and power cord: 5. 1 U disk (32G): 6. 5 pieces of reinforced polypropylene film; 7. Standard portable A moisture-proof and shock-proof box.
Standard mode	Ore mode; optional modes: alloy analysis mode, soil analysis mode
Self-diagnosis function	The instrument can automatically diagnose hardware, software, network, battery, etc. and generate logs to facilitate quick troubleshooting.
operating system	Window CE60 operating system, safe and secure
Test Methods	The basic parameter method supports the empirical coefficient method to correct the start of the test by touching or pulling the trigger. There is no need to pull the trigger for a long time during the test process. According to customer needs, the sample can also be tested by keeping the trigger pressed.
filter	Equipped with 8 filters, which can be automatically switched according to the test elements;
excitation source	High-power miniature straight plate X-ray tube, W target, 4W high-power X-ray tube, tube voltage 50KV, maximum current up to 100 uA; using KMX technology, higher X-ray count rate, ultra-low electronic noise design before each test , no external standards required, automatic energy calibration verification;
detector	American Moxtek Si-pin (6mm2 American Amptek Si-pin(25mm2 German KETEKSDD detector
Detect elements	Can be used for metal elements in ores and soil environments, Mg, AI, Si, P,S, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Hf, Ta, W, Hg, Se, Au, Br, Pb, Bi, Zr, Nb, Mo.Ag, Cd, Sn, Sb, Re, Ir, Pt, Hg, Ru, Rh, Pd and other elements. (Red is SDD detector configuration)