Manufacturer · Luoyang, ChinaExport & OEM support worldwide

sales@yuboo.com English

Service & parts / Application / Installation / Calibration

Keep it measuring.

Support follows the life of the instrument: prove the method before purchase, prepare the site, train the team, keep the result calibrated, resolve faults, and supply the right part.

Verifying the factory before purchase? Review Quality & Documents
YuBoo engineer training operators on a direct-reading spectrometer
On-site training / operator handoverInstallation to steady operation
02

Six service categories

What happens at each stage.

Each module states who it is for, when it applies, what the factory does, what you provide, what you receive and how it is delivered.

01

Application & Sample Testing

Application & Sample Testing

Can this instrument measure my material, elements and sample?

Who it is for

New customers evaluating a system, a method, or a new alloy.

When you need it

Before purchase, or before introducing a new material or grade.

What the factory does

Review the material and element list, define sample preparation, run the sample, issue a report and recommend the configuration.

What you provide

Material and grade, sample form, elements of interest, the decision behind the measurement, and the destination.

What you receive

Sample test report, application note and recommended configuration.

How it is delivered

Ship a sample for a laboratory trial, or review the application remotely first.

Arrange a sample test
02

Installation & Commissioning

Installation & Commissioning

Who is responsible for installation, commissioning and acceptance?

Who it is for

Laboratories and plants preparing to receive a new instrument.

When you need it

After the order is placed, through site preparation, arrival and acceptance.

What the factory does

Confirm site readiness, check utilities, install, commission, set the initial calibration and control sample, run customer samples, and complete FAT/SAT.

What you provide

Site layout, power, argon, temperature and humidity, access, samples, and named operators.

What you receive

Site readiness checklist, installation record, acceptance record and handover.

How it is delivered

Remote preparation, then factory engineer or local partner commissioning on site.

Prepare for installation
03

Training & Method Support

Training & Method Support

Can the operators prepare samples, measure, standardise and judge results independently?

Who it is for

Operators, laboratory supervisors and maintenance staff.

When you need it

At installation, when staff change, or when a new method or grade is introduced.

What the factory does

Train sample preparation, measurement, grade identification, standardisation, drift checks, result recording, daily maintenance and escalation.

What you provide

Trainees, production samples, current SOPs and the reporting format.

What you receive

Training record, operator checklist and method handover.

How it is delivered

On-site training, remote sessions, or a refresher programme.

Request operator training
04

Calibration & Maintenance

Calibration & Preventive Maintenance

Is the result still accurate, and how do we avoid an unexpected stop?

Who it is for

Laboratories with an instrument in routine production use.

When you need it

Initial calibration, periodic calibration, after repair or relocation, and when drift or repeatability changes.

What the factory does

Calibrate against reference material, verify control samples, check drift and repeatability, inspect the spark stand, optics, gas path and software, and agree a maintenance plan.

What you provide

Service history, reference materials, access to the instrument and a production window.

What you receive

Calibration record and preventive maintenance report.

How it is delivered

Remote guidance or on-site service. The calibration interval is confirmed in the contract or service plan, not assumed.

Book calibration or maintenance
05

Troubleshooting & Repair

Troubleshooting & Repair

How do we find the cause quickly and return the instrument to service?

Who it is for

Existing instrument users facing an alarm, drift, no result, or hardware fault.

When you need it

As soon as the symptom appears and before production is affected.

What the factory does

Triage remotely, define the checks the customer can complete, scope the part or visit, repair or replace, then verify with a standard or customer sample.

What you provide

Model, serial number, symptom, alarm, recent calibration record, photos or a short video.

What you receive

Service report and verification record.

How it is delivered

Email or remote session first; on-site service when the scope requires it. Warranty and chargeable work are confirmed before the intervention.

Request service support
06

Spare Parts & Consumables

Spare Parts & Consumables

Which parts need periodic replacement, and how do we order the correct one?

Who it is for

Laboratories maintaining an installed instrument and its sample workflow.

When you need it

Scheduled replacement, breakage, stock replenishment, or a new consumable requirement.

What the factory does

Identify the part by model and serial number, confirm the part number and quantity, quote, and dispatch.

What you provide

Model and serial number, part number or a clear photo, quantity, packing preference and destination country.

What you receive

Parts identification, quotation and dispatch record.

How it is delivered

Factory or local partner supply. Lead time and destination are confirmed on the quotation.

Spark stand and electrodesOptical windows and lensesGas filters, fittings and sealsVacuum pump partsReference and control samplesSample-preparation consumablesSoftware and electronic modulesMaintenance tools
Find spare parts
03

Service coverage, warranty & terms

What is factory, local, remote or paid.

Coverage is confirmed per market and contract. We separate the support routes rather than describe a generic global service.

Factory support

Application review, remote diagnostics, calibration planning, spare-parts identification and technical escalation from the factory team.

Local partner support

Where a partner is appointed, first-line installation, training and service can be delivered locally under factory technical guidance.

Remote support

Email, photos, video and remote sessions for triage, method checks, software settings and operator guidance.

On-site support

Installation, training, calibration, repair and verification visits, scoped per project and destination.

Paid service

Travel, on-site days, spare parts, consumables, calibration standards and work outside warranty are quoted before the intervention.

Regions

Remote support is provided from the factory. Local partner and on-site coverage are confirmed for the destination before the order.

Response

Factory business hours and the working time zone are confirmed in the service plan. Production-critical issues are triaged first.

Warranty

Warranty scope and exclusions are stated in the contract. Consumables, wear parts and damage from utilities or operation are excluded unless agreed.

Chargeable work

Travel, on-site days, spare parts, calibration standards and work outside warranty are quoted before the intervention.

Where no local partner is appointed, support is factory-remote with project-based on-site visits. We do not claim a local service point that does not exist.

04 / Request support

Tell us the instrument, the symptom and the decision.

For an application question, send the material and element list. For a fault, include the model, serial number, alarm and recent calibration record. For parts, include the part number or a clear photo.

We reply during factory business hours; urgent production issues are triaged first.

05 / Service questions

What to expect after delivery.

Still deciding? Send the material and the measurement target — we will reply with a practical next step.

Ask an application engineer
Do you support instruments after installation?

Yes. Support includes commissioning, operator training, calibration guidance, remote troubleshooting, spare parts, and arranged service visits.

Can you test our samples before we buy?

Sample testing can be arranged for application review. Share the material, grade, elements of interest, and the decision you need to support so the test can be scoped properly.

What information should a service request include?

Include the instrument model, serial number, a description of the issue, any error message, and recent calibration or maintenance history. Photos of the spark stand or screen can help.

Do you provide operator training?

Yes. Training can cover sample preparation, measurement, grade identification, standardisation, and record keeping, either at installation or as a separate programme.