Manufacturer · Luoyang, ChinaExport & OEM support worldwide

sales@yuboo.com English

Product directory / 2026

Products

Direct-reading OES sits at the core. The remaining families cover composition, mechanical testing, inspection, foundry control and laboratory workflow.

CORE TECHNOLOGY / DIRECT-READING OES

Direct-Reading OES

Quantitative chemical analysis on prepared solid metal samples. Choose SDB-810 or SDB-910 by application, base coverage and laboratory workflow.

SDB-810 · SDB-910 · 16-channel CCD · Fe · Al · Cu · Zn · Sn · Pb · Mg · Ni · Ti · Co

YuBoo SDB-810 full-spectrum CCD direct-reading optical emission spectrometer SDB-810Full-Spectrum CCD Direct-Reading SpectrometerA benchtop full-spectrum spark OES with 16-channel CCD detection and 130–700 nm Paschen-Runge optics for multi-base metal analysis. YuBoo SDB-910 full-spectrum CCD direct-reading optical emission spectrometer SDB-910Full-Spectrum CCD Direct-Reading SpectrometerA benchtop full-spectrum spark OES with 16-channel CCD detection, 120–800 nm optics and a typical 10–30 second multi-base analysis.

01 / Specialized analyzers

Composition Analysis

Complementary analyzers for elements and materials that require a different method from spark OES. Select by sample form, required element and detection range.

C/S · C/Si & CE · O/N/H · BENCHTOP XRF

Handheld XRF Alloy ID · PMI · scrapHandheld XRFHandheld XRF for alloy identification, PMI, scrap sorting, and precious-metal screening. Handheld LIBS Aluminium · carbon · lithiumHandheld LIBSHandheld LIBS for aluminium grades, carbon in steel, and lithium-related applications. Elemental Analyzers C/S · C/Si & CE · O/N/HElemental AnalyzersDedicated combustion, thermal, and inert gas fusion analyzers for carbon, sulfur, silicon, oxygen, nitrogen, and hydrogen. Benchtop XRF Precious metals · ore · mineralsBenchtop XRFBenchtop XRF for gold purity, precious-metal composition, ore, minerals, cement, and raw materials.

02 / Material performance

Mechanical Testing

Evaluate tensile, compression, bending, impact, fatigue and component performance. Configure the load frame, fixtures and software around your test standard.

UTM · IMPACT · FATIGUE & CREEP · FIXTURES & EXTENSOMETERS

Universal Testing Systems Tensile · compression · bendingUniversal Testing SystemsElectronic and hydraulic universal testing machines from 2 kN to 1000 kN. Impact Testing Charpy · low temperatureImpact TestingPendulum impact, low-temperature conditioning, notch verification, and specimen notching. Advanced & Custom Testing Bending · fatigue · creepAdvanced & Custom TestingRebar bending, fatigue, creep and torsion testing configured to the application. Fixtures & Accessories Grips · verification · calibrationFixtures & AccessoriesGrips, extensometers, environmental chambers, calibration accessories and compression load verification.

03 / Defect inspection

Non-Destructive Testing

Detect surface and internal defects without cutting the finished part. Choose the inspection method according to material, geometry and defect type.

ULTRASONIC · MAGNETIC PARTICLE · X-RAY · EDDY CURRENT · THICKNESS · ROUGHNESS

Ultrasonic Testing Conventional · TOFD · phased arrayUltrasonic TestingDigital ultrasonic flaw detection, TOFD and 64-channel phased array for internal defects. Magnetic Particle Testing Yoke · AC / DCMagnetic Particle TestingMagnetic yoke inspection for surface and near-surface defects in castings, forgings and welds. X-Ray Testing 120–350 kV · film radiographyX-Ray TestingPortable X-ray systems from 120 to 350 kV for castings, welds and pressure parts. Eddy Current Testing Surface cracks · conductivityEddy Current TestingDual-frequency eddy current inspection, conductivity, thickness and magnetic memory. Thickness Gauges Wall thickness · through coatingThickness GaugesUltrasonic wall thickness gauges, including through-coating measurement, with probes and calibration blocks. Surface Roughness Testers Ra · Rz · touch screenSurface Roughness TestersPortable surface roughness testers with Ra/Rz parameters, detachable drives and calibration standards.

04 / Mould control

Sand Testing

Control the mould before it controls the casting. Start with the green-sand routine, then go deeper into composition or resin/core testing.

GREEN SAND · SAND ANALYSIS · RESIN & CORE · ACCESSORIES

Green Sand Testing Moisture · compactability · strengthGreen Sand TestingControl moisture, compactability, strength, permeability and mould hardness in the green-sand routine. Sand Composition & Granularity Sieve · clay · LOISand Composition & GranularityCheck grain-size distribution, clay content, methylene blue value and loss on ignition. Resin & Core Sand Testing Cold tensile · hot strengthResin & Core Sand TestingTest cold tensile, bending, hot strength and working life for resin-bonded sand and cores. Specimen Preparation & Accessories Rammers · tubes · fixturesSpecimen Preparation & AccessoriesStandard rammers, specimen tubes, strength fixtures, sieves, calibration tools and consumables for repeatable sand testing.

05 / Microstructure

Metallography

Inspect graphite form, nodularity, matrix, grain size and case depth — with the cutting, mounting and polishing workflow around the microscope.

MICROSCOPY · CUTTING · MOUNTING · GRINDING & POLISHING

Metallurgical Microscopes Microstructure · image analysisMetallurgical MicroscopesMetallurgical microscopy for graphite form, nodularity, matrix, grain size and case depth. Metallographic Cutting Machines Sectioning · cut-offMetallographic Cutting MachinesAbrasive cut-off and sectioning equipment for metallographic samples. Metallographic Mounting Presses Hot mounting · cold mountingMetallographic Mounting PressesMounting presses and consumables for specimen edge protection and handling. Grinding & Polishing Machines Grinding · polishingGrinding & Polishing MachinesGrinding and polishing machines with consumables for a repeatable metallographic surface.

06 / Surface & bulk hardness

Hardness Testing

Verify hardness on castings, heat-treated parts and finished components using the method that fits the material, test area and standard.

BRINELL · ROCKWELL · VICKERS · PORTABLE

Brinell Hardness Testers Castings · forgings · large grainBrinell Hardness TestersBrinell hardness for castings, forgings and large-grain materials. Rockwell Hardness Testers Heat treatment · batch controlRockwell Hardness TestersRockwell hardness for heat-treated parts and batch hardness control. Vickers & Micro-Vickers Testers Small areas · weld zonesVickers & Micro-Vickers TestersVickers and micro-Vickers testing for small areas, thin sections and weld zones. Portable Hardness Testers Leeb · UCI · portable RockwellPortable Hardness TestersLeeb, UCI and portable Rockwell testing for field and large-part checks.

07 / Melt & pouring control

Temperature Measurement

Measure pouring temperature and read melt condition with infrared, portable, display and thermocouple systems.

INFRARED · TEMPERATURE GUNS · LARGE DISPLAYS · THERMOCOUPLES

Infrared Thermometers Non-contact · melt & surfaceInfrared ThermometersInfrared temperature measurement for melt, pouring and surface readings. Temperature Guns Portable · spot checksTemperature GunsPortable infrared temperature guns for fast spot checks. Pouring floor · LEDLarge-Screen DisplaysLarge LED temperature displays for pouring and furnace areas. Immersion · fixed probesThermocouplesThermocouples, immersion probes and compensation cables for melt and furnace measurement.