Ultrasonic · magnetic particle · X-ray · eddy current · gauges
NDT Laboratory
Start with the defect type and material. Magnetic particle testing covers surface-breaking defects; ultrasonic and X-ray testing cover internal defects; eddy current covers conductive materials. Thickness and surface roughness complete the workshop inspection set.
Internal defects, wall thickness and weld inspection
Ultrasonic Testing
AFD100
Digital Ultrasonic Flaw Detector
A conventional digital ultrasonic flaw detector for welds, forgings, castings and pressure parts.
View model
AFD200
Digital Ultrasonic Flaw Detector
A higher-range digital ultrasonic flaw detector with 500 setups and 1000 A-scan memory.
View model
AFD856
TOFD Ultrasonic Flaw Detector
A 100-channel ultrasonic detector with tunable square-wave pulser for TOFD and demanding conventional UT.
View model
PA16/64
Phased Array & TOFD Flaw Detector
A portable 64-channel phased array and TOFD detector for complex welds and critical components.
View model
On request
- Ultrasonic thickness gauges
- Probes, angle probes, wedges and cables
- Weld and pipe scanners
- Calibration blocks
- Couplant
Magnetic yoke inspection for surface and near-surface defects
Magnetic Particle Testing
AJE-220 AC
Magnetic Yoke Flaw Detector
An AC magnetic yoke for surface and near-surface crack detection on ferromagnetic parts.
View model
AJE-220 AC/DC
Magnetic Yoke Flaw Detector
An AC/DC magnetic yoke with rechargeable battery for field inspection without mains power.
View model
On request
- Magnetic powders
- UV inspection lamps
- Demagnetizers and gauss meters
Internal porosity, shrinkage, slag and lack of fusion
X-Ray Testing
XR Series
X-Ray NDT Testing System
A configurable X-ray NDT system for film radiography of castings, welds and pressure parts.
View model
XR-120
Portable X-Ray Flaw Detector
A 120–300 kV portable X-ray system for radiography of welds and castings.
View model
XR-180
Portable X-Ray Flaw Detector
A 180–350 kV portable X-ray system for thicker sections and larger castings.
View model
On request
- Digital radiography (DR)
- Computed radiography (CR)
- Industrial CT
- Flat panel detectors and imaging plates
- Radiation safety accessories
Tubes, bars, wire and conductive materials
Eddy Current Testing
AEC620
Portable Eddy Current Flaw Detector
A portable dual-frequency eddy current detector for surface and near-surface cracks.
View model
AEC630
Portable Eddy Current Flaw Detector
A portable eddy current detector with conductivity, thickness and magnetic-memory functions.
View model
On request
- Eddy current probes and scanners
- Conductivity standards
- Coating thickness gauges
- Automatic tube, bar and wire inspection systems
Ultrasonic and coating thickness measurement
Thickness Gauges
ATG400
Ultrasonic Thickness Gauge
A multi-mode ultrasonic thickness gauge for wall thickness through paint and coatings.
View model
ATG500
Ultrasonic Thickness Gauge
A portable ultrasonic thickness gauge for wall-thickness checks on metals and plastics.
View model
On request
- Coating thickness gauges
- Probes and calibration blocks
- High-temperature and small-diameter probes
Portable roughness measurement for machined and inspected surfaces
Surface Roughness Testers
Next step
Configure ndt laboratory.
Send the material, sample form, standard, and throughput. We will confirm the model, fixture, and delivery scope.

