AFD100 · 0–6000 mm / Non-destructive testing
AFD100Digital Ultrasonic Flaw Detector
A conventional digital ultrasonic flaw detector for welds, forgings, castings and pressure parts.
AFD100
YuBoo Instrument / Luoyang, China
01 / Why this configuration
Built around a real measurement decision.
The AFD100 combines conventional pulse-echo inspection with DAC, AVG, TCG, B-scan and AWS evaluation in a portable housing. It is intended for routine weld, forging and component inspection where a clear A-scan and a recorded result matter.
A conventional digital ultrasonic flaw detector for welds, forgings, castings and pressure parts. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.
02 / Configuration
Key specifications.
Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.
Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.
Request a configuration| Range | 0–6000 mm |
|---|---|
| Channels | 100 |
| Frequency | 0.5–15 MHz |
| Gain | 0–120 dB |
| Velocity | 1000–15000 m/s |
| Ports | BNC or Lemo 01 |
| Dimensions | 240 × 156 × 48 mm |
| Weight | 1.0 kg |
Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.
03 / Where it fits
Applications and materials.
Non-destructive testing supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.
See how we support the installation- Weld inspection
- Forgings and castings
- Pressure vessels
- Shafts and axles
- Incoming material checks
- Field inspection
Typical materials
If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.
Before you specify
AFD100 — practical answers.
Still deciding? Send the material and the measurement target — we will reply with a practical next step.
Ask an application engineerWhat is the AFD100 used for?
A conventional digital ultrasonic flaw detector for welds, forgings, castings and pressure parts. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.
Which materials and sample forms does the AFD100 cover?
Typical materials: Carbon steel, Stainless steel, Aluminium, Castings. Typical tasks: weld inspection, forgings and castings. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.
What are the key specifications of the AFD100?
Starting point: range 0–6000 mm; channels 100; frequency 0.5–15 MHz. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.
How is the configuration confirmed before ordering?
Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.
Put it to work
Configure AFD100 around your material.
Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.