Manufacturer · Luoyang, ChinaExport & OEM support worldwide

sales@yuboo.com English

AFD856 · TOFD / conventional UT / Non-destructive testing

AFD856TOFD Ultrasonic Flaw Detector

A 100-channel ultrasonic detector with tunable square-wave pulser for TOFD and demanding conventional UT.

Carbon steelStainless steelAlloy steelAluminium Application-specific configuration
Non-destructive testing
AFD856
AFD856 TOFD ultrasonic flaw detector YuBoo Instrument / Luoyang, China

01 / Why this configuration

Built around a real measurement decision.

The AFD856 adds a tunable square-wave pulser, a 15 MHz RF bandwidth and a 640 × 480 display to the conventional UT workflow. It is intended for thicker sections and TOFD-style inspections where penetration and signal quality are the limiting factors.

A 100-channel ultrasonic detector with tunable square-wave pulser for TOFD and demanding conventional UT. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.

100 channels
0–9999 mm range
110 dB gain
Square-wave pulser
TOFD-ready
USB data transfer

02 / Configuration

Key specifications.

Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.

Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.

Request a configuration
Range0–9999 mm
Channels100
Frequency0.5–15 MHz
Gain110 dB max
PulserTunable square wave
Display640 × 480 TFT
Velocity100–20000 m/s
BatteryRechargeable

Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.

03 / Where it fits

Applications and materials.

Non-destructive testing supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.

See how we support the installation
  • Thick-section welds
  • TOFD inspections
  • Pressure vessels
  • Pipes and tanks
  • Forgings
  • Turbine components

Typical materials

Carbon steelStainless steelAlloy steelAluminium

If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.

Before you specify

AFD856 — practical answers.

Still deciding? Send the material and the measurement target — we will reply with a practical next step.

Ask an application engineer
What is the AFD856 used for?

A 100-channel ultrasonic detector with tunable square-wave pulser for TOFD and demanding conventional UT. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.

Which materials and sample forms does the AFD856 cover?

Typical materials: Carbon steel, Stainless steel, Alloy steel, Aluminium. Typical tasks: thick-section welds, tofd inspections. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.

What are the key specifications of the AFD856?

Starting point: range 0–9999 mm; channels 100; frequency 0.5–15 MHz. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.

How is the configuration confirmed before ordering?

Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.

Put it to work

Configure AFD856 around your material.

Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.