AFD200 · 0–10000 mm / Non-destructive testing
AFD200Digital Ultrasonic Flaw Detector
A higher-range digital ultrasonic flaw detector with 500 setups and 1000 A-scan memory.
AFD200
YuBoo Instrument / Luoyang, China
01 / Why this configuration
Built around a real measurement decision.
The AFD200 extends the conventional UT platform to a 0–10000 mm range with 500 independent setups and 1000 A-scan records. It is suited to larger castings, long shafts and welds where setup recall and traceable records are needed.
A higher-range digital ultrasonic flaw detector with 500 setups and 1000 A-scan memory. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.
02 / Configuration
Key specifications.
Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.
Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.
Request a configuration| Range | 0–10000 mm |
|---|---|
| Channels | 500 |
| Frequency | 0.5–15 MHz |
| Gain | 0–120 dB |
| Velocity | 1000–15000 m/s |
| Memory | 1000 A-scans |
| Dimensions | 240 × 156 × 48 mm |
| Weight | 1.0 kg |
Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.
03 / Where it fits
Applications and materials.
Non-destructive testing supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.
See how we support the installation- Large castings
- Long shafts
- Weld inspection
- Pressure equipment
- Forgings
- Field service
Typical materials
If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.
Before you specify
AFD200 — practical answers.
Still deciding? Send the material and the measurement target — we will reply with a practical next step.
Ask an application engineerWhat is the AFD200 used for?
A higher-range digital ultrasonic flaw detector with 500 setups and 1000 A-scan memory. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.
Which materials and sample forms does the AFD200 cover?
Typical materials: Carbon steel, Stainless steel, Aluminium, Castings. Typical tasks: large castings, long shafts. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.
What are the key specifications of the AFD200?
Starting point: range 0–10000 mm; channels 500; frequency 0.5–15 MHz. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.
How is the configuration confirmed before ordering?
Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.
Put it to work
Configure AFD200 around your material.
Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.