AJE-220 AC · magnetic particle / Non-destructive testing
AJE-220 ACMagnetic Yoke Flaw Detector
An AC magnetic yoke for surface and near-surface crack detection on ferromagnetic parts.
AJE-220 AC
YuBoo Instrument / Luoyang, China
01 / Why this configuration
Built around a real measurement decision.
The AJE-220 AC uses a magnetic yoke to magnetise ferromagnetic workpieces for magnetic particle inspection. It is a portable, direct-mains unit for weld joints, castings, forgings and irregular machine parts.
An AC magnetic yoke for surface and near-surface crack detection on ferromagnetic parts. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.
02 / Configuration
Key specifications.
Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.
Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.
Request a configuration| Power | 220 V / 50 Hz |
|---|---|
| Current | AC 2.0 A |
| Working interval | 30 s on / 30 s off |
| Pole distance | 0–220 mm |
| Lifting power | AC > 5.5 kg |
| Weight | 2.9 kg |
Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.
03 / Where it fits
Applications and materials.
Non-destructive testing supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.
See how we support the installation- Weld inspection
- Castings and forgings
- Machine parts
- Pressure equipment
- Shipbuilding
- Field inspection
Typical materials
If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.
Before you specify
AJE-220 AC — practical answers.
Still deciding? Send the material and the measurement target — we will reply with a practical next step.
Ask an application engineerWhat is the AJE-220 AC used for?
An AC magnetic yoke for surface and near-surface crack detection on ferromagnetic parts. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.
Which materials and sample forms does the AJE-220 AC cover?
Typical materials: Carbon steel, Low-alloy steel, Ferromagnetic castings, Ferromagnetic forgings. Typical tasks: weld inspection, castings and forgings. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.
What are the key specifications of the AJE-220 AC?
Starting point: power 220 V / 50 Hz; current AC 2.0 A; working interval 30 s on / 30 s off. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.
How is the configuration confirmed before ordering?
Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.
Put it to work
Configure AJE-220 AC around your material.
Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.