Manufacturer · Luoyang, ChinaExport & OEM support worldwide

sales@yuboo.com English

ART380 · touch screen / Non-destructive testing

ART380Surface Roughness Tester

A touch-screen roughness tester with a detachable drive unit and 22 parameters.

SteelAluminiumCast ironCopper alloysPlastics Application-specific configuration
Non-destructive testing
ART380
ART380 portable surface roughness tester with touch screen YuBoo Instrument / Luoyang, China

01 / Why this configuration

Built around a real measurement decision.

The ART380 combines a 3.5-inch colour touch screen with a detachable stylus drive, so the display can be separated from the drive for large or awkward parts. It covers 22 roughness parameters and supports Bluetooth output.

A touch-screen roughness tester with a detachable drive unit and 22 parameters. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.

22 roughness parameters
3.5-inch touch screen
Detachable drive unit
160 μm range
Bluetooth output
Built-in Li-ion battery

02 / Configuration

Key specifications.

Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.

Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.

Request a configuration
Parameters22, including Ra, Rz, Rq, Rt
RangeUp to 160 μm (optional 320 μm)
Display3.5-inch colour touch TFT
DriveIntegrated or separated
OutputBluetooth / printer
BatteryLi-ion rechargeable
StandardsISO / DIN / ANSI / JIS
ApplicationFlat, curved, grooves, bores

Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.

03 / Where it fits

Applications and materials.

Non-destructive testing supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.

See how we support the installation
  • Large machined parts
  • Curved surfaces
  • Grooves and recesses
  • Bores and shafts
  • Incoming inspection
  • On-site metrology

Typical materials

SteelAluminiumCast ironCopper alloysPlastics

If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.

Before you specify

ART380 — practical answers.

Still deciding? Send the material and the measurement target — we will reply with a practical next step.

Ask an application engineer
What is the ART380 used for?

A touch-screen roughness tester with a detachable drive unit and 22 parameters. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.

Which materials and sample forms does the ART380 cover?

Typical materials: Steel, Aluminium, Cast iron, Copper alloys. Typical tasks: large machined parts, curved surfaces. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.

What are the key specifications of the ART380?

Starting point: parameters 22, including Ra, Rz, Rq, Rt; range Up to 160 μm (optional 320 μm); display 3.5-inch colour touch TFT. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.

How is the configuration confirmed before ordering?

Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.

Put it to work

Configure ART380 around your material.

Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.