ART300 · Ra / Rz / Rq / Non-destructive testing
ART300Surface Roughness Tester
A portable roughness tester for machined surfaces, with Ra, Rz and multi-parameter output.
ART300
YuBoo Instrument / Luoyang, China
01 / Why this configuration
Built around a real measurement decision.
The ART300 is a portable roughness instrument for workshop, laboratory and metrology use. It displays the common roughness parameters on an OLED screen, stores 100 groups of data and can output results to a printer or PC.
A portable roughness tester for machined surfaces, with Ra, Rz and multi-parameter output. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.
02 / Configuration
Key specifications.
Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.
Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.
Request a configuration| Parameters | Ra, Rz, Rq, Rt, Rp, Rv and more |
|---|---|
| Display | 128 × 64 OLED |
| Memory | 100 groups with waveform |
| Battery | >20 hours |
| Standards | ISO, DIN, ANSI, JIS |
| Output | Printer / PC |
| Travel | Standard stylus drive |
| Application | Machined surfaces |
Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.
03 / Where it fits
Applications and materials.
Non-destructive testing supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.
See how we support the installation- Machined surfaces
- Shafts and bores
- Incoming inspection
- Workshop metrology
- Repair verification
- Production sampling
Typical materials
If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.
Before you specify
ART300 — practical answers.
Still deciding? Send the material and the measurement target — we will reply with a practical next step.
Ask an application engineerWhat is the ART300 used for?
A portable roughness tester for machined surfaces, with Ra, Rz and multi-parameter output. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.
Which materials and sample forms does the ART300 cover?
Typical materials: Steel, Aluminium, Cast iron, Copper alloys. Typical tasks: machined surfaces, shafts and bores. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.
What are the key specifications of the ART300?
Starting point: parameters Ra, Rz, Rq, Rt, Rp, Rv and more; display 128 × 64 OLED; memory 100 groups with waveform. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.
How is the configuration confirmed before ordering?
Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.
Put it to work
Configure ART300 around your material.
Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.