ATG400 · pulse-echo / echo-echo / Non-destructive testing
ATG400Ultrasonic Thickness Gauge
A multi-mode ultrasonic thickness gauge for wall thickness through paint and coatings.
ATG400
YuBoo Instrument / Luoyang, China
01 / Why this configuration
Built around a real measurement decision.
The ATG400 is a multi-mode ultrasonic thickness gauge. Pulse-echo mode measures wall thickness and finds pits; echo-echo mode ignores paint or coating thickness to read the metal beneath. It suits metals, plastics, glass, composites and other ultrasonic-conductive materials.
A multi-mode ultrasonic thickness gauge for wall thickness through paint and coatings. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.
02 / Configuration
Key specifications.
Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.
Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.
Request a configuration| Range (pulse-echo) | 0.65–600 mm (steel) |
|---|---|
| Range (echo-echo) | 3–30 mm |
| Resolution | 0.1 / 0.01 mm |
| Accuracy | ±(0.5% + 0.01) mm |
| Velocity | 1000–9999 m/s |
| Memory | 20 files × 99 values |
| Power | 2 × AA, ~100 h |
| Dimensions | 150 × 74 × 32 mm |
Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.
03 / Where it fits
Applications and materials.
Non-destructive testing supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.
See how we support the installation- Wall thickness
- Pipes and tanks
- Hull and plate surveys
- Coated steel
- Plastic and glass
- In-service inspection
Typical materials
If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.
Before you specify
ATG400 — practical answers.
Still deciding? Send the material and the measurement target — we will reply with a practical next step.
Ask an application engineerWhat is the ATG400 used for?
A multi-mode ultrasonic thickness gauge for wall thickness through paint and coatings. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.
Which materials and sample forms does the ATG400 cover?
Typical materials: Carbon steel, Stainless steel, Aluminium, Plastics. Typical tasks: wall thickness, pipes and tanks. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.
What are the key specifications of the ATG400?
Starting point: range (pulse-echo) 0.65–600 mm (steel); range (echo-echo) 3–30 mm; resolution 0.1 / 0.01 mm. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.
How is the configuration confirmed before ordering?
Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.
Put it to work
Configure ATG400 around your material.
Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.