Manufacturer · Luoyang, ChinaExport & OEM support worldwide

sales@yuboo.com English

AEC630 · eddy current + MMM / Non-destructive testing

AEC630Portable Eddy Current Flaw Detector

A portable eddy current detector with conductivity, thickness and magnetic-memory functions.

AluminiumTitaniumStainless steelCarbon steelCopper alloys Application-specific configuration
Non-destructive testing
AEC630
AEC630 portable eddy current flaw detector with touchscreen YuBoo Instrument / Luoyang, China

01 / Why this configuration

Built around a real measurement decision.

The AEC630 builds on the dual-frequency eddy current platform with conductivity, thickness and magnetic-memory measurement functions. It is intended for surface inspection, material sorting and stress-concentration screening where several electromagnetic methods are needed.

A portable eddy current detector with conductivity, thickness and magnetic-memory functions. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.

10 Hz–10 MHz
2 frequencies
Conductivity / thickness
Magnetic memory
5.7-inch TFT
8 GB recording

02 / Configuration

Key specifications.

Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.

Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.

Request a configuration
Frequency10 Hz–10 MHz
Channels2 independent
Gain0–99 dB
Phase0–359°
Display5.7-inch TFT
FunctionsET / conductivity / thickness / MMM
Power110–220 V, Li battery
Lift-off1–3 mm

Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.

03 / Where it fits

Applications and materials.

Non-destructive testing supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.

See how we support the installation
  • Surface cracks
  • Material sorting
  • Conductivity checks
  • Thickness measurement
  • Stress-concentration screening
  • Aerospace components

Typical materials

AluminiumTitaniumStainless steelCarbon steelCopper alloys

If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.

Before you specify

AEC630 — practical answers.

Still deciding? Send the material and the measurement target — we will reply with a practical next step.

Ask an application engineer
What is the AEC630 used for?

A portable eddy current detector with conductivity, thickness and magnetic-memory functions. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.

Which materials and sample forms does the AEC630 cover?

Typical materials: Aluminium, Titanium, Stainless steel, Carbon steel. Typical tasks: surface cracks, material sorting. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.

What are the key specifications of the AEC630?

Starting point: frequency 10 Hz–10 MHz; channels 2 independent; gain 0–99 dB. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.

How is the configuration confirmed before ordering?

Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.

Put it to work

Configure AEC630 around your material.

Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.