XR-180 · 180–350 kV / Non-destructive testing
XR-180Portable X-Ray Flaw Detector
A 180–350 kV portable X-ray system for thicker sections and larger castings.
XR-180
YuBoo Instrument / Luoyang, China
01 / Why this configuration
Built around a real measurement decision.
The XR-180 extends the portable X-ray range to 180–350 kV for thicker sections, larger castings and heavy weldments. The tube and beam configuration are selected against the required penetration and standard.
A 180–350 kV portable X-ray system for thicker sections and larger castings. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.
02 / Configuration
Key specifications.
Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.
Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.
Request a configuration| Voltage | 180–350 kV |
|---|---|
| Tube | Glass or ceramic |
| Beam | Directional / panoramic |
| Insulation | SF6 gas |
| Cooling | Forced air |
| Application | Film radiography |
Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.
03 / Where it fits
Applications and materials.
Non-destructive testing supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.
See how we support the installation- Heavy weldments
- Large castings
- Pressure vessels
- Pipes and fittings
- Power equipment
- Foundry inspection
Typical materials
If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.
Before you specify
XR-180 — practical answers.
Still deciding? Send the material and the measurement target — we will reply with a practical next step.
Ask an application engineerWhat is the XR-180 used for?
A 180–350 kV portable X-ray system for thicker sections and larger castings. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.
Which materials and sample forms does the XR-180 cover?
Typical materials: Carbon steel, Stainless steel, Alloy steel, Cast irons. Typical tasks: heavy weldments, large castings. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.
What are the key specifications of the XR-180?
Starting point: voltage 180–350 kV; tube Glass or ceramic; beam Directional / panoramic. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.
How is the configuration confirmed before ordering?
Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.
Put it to work
Configure XR-180 around your material.
Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.