Manufacturer · Luoyang, ChinaExport & OEM support worldwide

sales@yuboo.com English

XR-120 · 120–300 kV / Non-destructive testing

XR-120Portable X-Ray Flaw Detector

A 120–300 kV portable X-ray system for radiography of welds and castings.

Carbon steelStainless steelAluminiumCast irons Application-specific configuration
Non-destructive testing
XR-120
XR-120 portable X-ray flaw detector generator and controller YuBoo Instrument / Luoyang, China

01 / Why this configuration

Built around a real measurement decision.

The XR-120 covers the 120–300 kV range for film radiography of welds, castings and pressure parts. Directional and panoramic tube options are available, with SF6 insulation and forced-air cooling.

A 120–300 kV portable X-ray system for radiography of welds and castings. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.

120–300 kV
Directional / panoramic
Glass or ceramic tube
SF6 insulation
Forced-air cooling
Portable generator

02 / Configuration

Key specifications.

Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.

Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.

Request a configuration
Voltage120–300 kV
TubeGlass or ceramic
BeamDirectional / panoramic
InsulationSF6 gas
CoolingForced air
ApplicationFilm radiography

Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.

03 / Where it fits

Applications and materials.

Non-destructive testing supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.

See how we support the installation
  • Weld radiography
  • Castings
  • Pressure vessels
  • Pipes
  • Automotive parts
  • Field inspection

Typical materials

Carbon steelStainless steelAluminiumCast irons

If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.

Before you specify

XR-120 — practical answers.

Still deciding? Send the material and the measurement target — we will reply with a practical next step.

Ask an application engineer
What is the XR-120 used for?

A 120–300 kV portable X-ray system for radiography of welds and castings. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.

Which materials and sample forms does the XR-120 cover?

Typical materials: Carbon steel, Stainless steel, Aluminium, Cast irons. Typical tasks: weld radiography, castings. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.

What are the key specifications of the XR-120?

Starting point: voltage 120–300 kV; tube Glass or ceramic; beam Directional / panoramic. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.

How is the configuration confirmed before ordering?

Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.

Put it to work

Configure XR-120 around your material.

Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.