Manufacturer · Luoyang, ChinaExport & OEM support worldwide

sales@yuboo.com English

Tensile · Compression · Bending / Mechanical testing

UTM SeriesUniversal Testing Machine

Prove the mechanical properties behind the chemistry: tensile strength, yield, elongation, compression, and bending.

Cast ironSteel castingsAluminium castingsCopper alloysWelded components Application-specific configuration
Mechanical testing
UTM Series
YuBoo universal testing machine with servo-controlled load frame and workstation YuBoo Instrument / Luoyang, China

01 / Why this configuration

Built around a real measurement decision.

Chemistry tells you what the metal is. Mechanical testing shows what it will do under load. A universal testing machine completes the foundry laboratory by testing cast test bars and finished components to the relevant standard.

Prove the mechanical properties behind the chemistry: tensile strength, yield, elongation, compression, and bending. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.

Tensile, compression, and bending test configurations
Servo-controlled loading and digital data capture
Test-bar grips, extensometers, and fixtures available
Software workflow for curves, results, and reports
Capacity selected around your specimen range
Installation and operator training available

02 / Configuration

Key specifications.

Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.

Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.

Request a configuration
ConfigurationServo-controlled universal testing machine
Test typesTensile, compression, bending (fixture-dependent)
CapacitySelected around specimen and standard
ControlDigital closed-loop control with workstation
OutputLoad–displacement curve, strength, yield, elongation
FixturesGrips and extensometers specified per application
StandardsConfigured to the test standard you work to
FootprintConfirmed against final configuration

Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.

03 / Where it fits

Applications and materials.

Mechanical testing supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.

See how we support the installation
  • Test bars per heat
  • Heat-treatment verification
  • Weld procedure qualification
  • Customer acceptance testing
  • Failure analysis
  • Design and material verification

Typical materials

Cast ironSteel castingsAluminium castingsCopper alloysWelded components

If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.

Before you specify

UTM Series — practical answers.

Still deciding? Send the material and the measurement target — we will reply with a practical next step.

Ask an application engineer
What is the UTM Series used for?

Prove the mechanical properties behind the chemistry: tensile strength, yield, elongation, compression, and bending. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.

Which materials and sample forms does the UTM Series cover?

Typical materials: Cast iron, Steel castings, Aluminium castings, Copper alloys. Typical tasks: test bars per heat, heat-treatment verification. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.

What are the key specifications of the UTM Series?

Starting point: configuration Servo-controlled universal testing machine; test types Tensile, compression, bending (fixture-dependent); capacity Selected around specimen and standard. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.

How is the configuration confirmed before ordering?

Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.

Put it to work

Configure UTM Series around your material.

Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.