Brinell · electronic loading / Hardness testing
HB-3000CElectronic Brinell Hardness Tester
An electronic Brinell tester with closed-loop load control and 330 mm height.
HB-3000C
Configuration and sensor set confirmed at quotation.
01 / Why this configuration
Built around a real measurement decision.
The HB-3000C uses closed-loop electronic loading and a pressure sensor to apply Brinell loads. The LCD shows the test parameters and hardness value.
An electronic Brinell tester with closed-loop load control and 330 mm height. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.
02 / Configuration
Key specifications.
Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.
Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.
Request a configuration| Loads | 612.9–29421 N |
|---|---|
| Range | 5–650 HBW |
| Loading | Electronic closed-loop |
| Max height | 330 mm |
| Throat | 150 mm |
| Dimensions | 700 × 268 × 980 mm |
| Weight | 210 kg |
Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.
03 / Where it fits
Applications and materials.
Hardness testing supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.
See how we support the installation- Castings
- Forgings
- Bearing alloys
- Annealed steel
- Large parts
Typical materials
If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.
Before you specify
HB-3000C — practical answers.
Still deciding? Send the material and the measurement target — we will reply with a practical next step.
Ask an application engineerWhat is the HB-3000C used for?
An electronic Brinell tester with closed-loop load control and 330 mm height. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.
Which materials and sample forms does the HB-3000C cover?
Typical materials: Cast iron, Carbon steel, Alloy steel, Aluminium. Typical tasks: castings, forgings. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.
What are the key specifications of the HB-3000C?
Starting point: loads 612.9–29421 N; range 5–650 HBW; loading Electronic closed-loop. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.
How is the configuration confirmed before ordering?
Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.
Put it to work
Configure HB-3000C around your material.
Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.