Rockwell · HRA / HRB / HRC / Hardness testing
HR-150AManual Rockwell Hardness Tester
A manual Rockwell tester with dual-scale dial for HRA, HRB and HRC.
HR-150A
YuBoo Instrument / Luoyang, China
01 / Why this configuration
Built around a real measurement decision.
The HR-150A is a mechanical Rockwell tester with a cast frame and dial indicator. The load lever and hardened anvil set cover hardened steel, case-hardened parts, bearing materials and non-ferrous alloys.
A manual Rockwell tester with dual-scale dial for HRA, HRB and HRC. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.
02 / Configuration
Key specifications.
Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.
Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.
Request a configuration| Preliminary load | 98.07 N (10 kgf) |
|---|---|
| Total load | 588.4 / 980.7 / 1471 N |
| Scales | HRA / HRB / HRC |
| Range | 20–95 HRA; 10–100 HRB; 20–70 HRC |
| Resolution | 0.5 HR |
| Max height | 170 mm |
| Dimensions | 470 × 238 × 630 mm |
| Weight | 70 kg |
Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.
03 / Where it fits
Applications and materials.
Hardness testing supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.
See how we support the installation- Hardened steel
- Case-hardened parts
- Bearing materials
- Aluminium and copper alloys
- Heat-treatment control
- Incoming inspection
Typical materials
If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.
Before you specify
HR-150A — practical answers.
Still deciding? Send the material and the measurement target — we will reply with a practical next step.
Ask an application engineerWhat is the HR-150A used for?
A manual Rockwell tester with dual-scale dial for HRA, HRB and HRC. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.
Which materials and sample forms does the HR-150A cover?
Typical materials: Carbon steel, Alloy steel, Cast iron, Aluminium. Typical tasks: hardened steel, case-hardened parts. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.
What are the key specifications of the HR-150A?
Starting point: preliminary load 98.07 N (10 kgf); total load 588.4 / 980.7 / 1471 N; scales HRA / HRB / HRC. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.
How is the configuration confirmed before ordering?
Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.
Put it to work
Configure HR-150A around your material.
Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.