Manufacturer · Luoyang, ChinaExport & OEM support worldwide

sales@yuboo.com English

Brinell · 8–650 HBW / Hardness testing

HB-3000BBrinell Hardness Tester

A bench-top electronic Brinell tester for castings, forgings and annealed parts.

Cast ironCarbon steelAlloy steelAluminiumCopper alloys Application-specific configuration
Hardness testing
HB-3000B
HB-3000B electronic Brinell hardness tester YuBoo Instrument / Luoyang, China

01 / Why this configuration

Built around a real measurement decision.

The HB-3000B applies Brinell loads electronically and displays the test parameters on an LCD. It is intended for castings, forgings, annealed and normalised parts, and non-ferrous components.

A bench-top electronic Brinell tester for castings, forgings and annealed parts. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.

187.5–3000 kgf test loads
8–650 HBW range
Electronic loading
LCD with Chinese/English
Max specimen height 230 mm
Readout by microscope or software

02 / Configuration

Key specifications.

Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.

Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.

Request a configuration
Test loads187.5 / 250 / 500 / 750 / 1000 / 3000 kgf
Range8–650 HBW
Max height230 mm
Throat120 mm
PowerAC 220 V / 50 Hz
Dimensions709 × 230 × 854 mm
Weight122 kg

Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.

03 / Where it fits

Applications and materials.

Hardness testing supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.

See how we support the installation
  • Castings and forgings
  • Annealed and normalised parts
  • Non-ferrous components
  • Incoming material
  • Heat-treatment verification
  • Quality documentation

Typical materials

Cast ironCarbon steelAlloy steelAluminiumCopper alloys

If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.

Before you specify

HB-3000B — practical answers.

Still deciding? Send the material and the measurement target — we will reply with a practical next step.

Ask an application engineer
What is the HB-3000B used for?

A bench-top electronic Brinell tester for castings, forgings and annealed parts. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.

Which materials and sample forms does the HB-3000B cover?

Typical materials: Cast iron, Carbon steel, Alloy steel, Aluminium. Typical tasks: castings and forgings, annealed and normalised parts. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.

What are the key specifications of the HB-3000B?

Starting point: test loads 187.5 / 250 / 500 / 750 / 1000 / 3000 kgf; range 8–650 HBW; max height 230 mm. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.

How is the configuration confirmed before ordering?

Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.

Put it to work

Configure HB-3000B around your material.

Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.