Vickers · 5–5000 HV / Hardness testing
HVS-10Digital Vickers Hardness Tester
A digital Vickers tester for small parts, thin sections, coatings and weld zones.
HVS-10
YuBoo Instrument / Luoyang, China
01 / Why this configuration
Built around a real measurement decision.
The HVS-10 combines a precision optical system with automatic load application. It measures Vickers hardness from 5 to 5000 HV on small, thin or surface-treated specimens.
A digital Vickers tester for small parts, thin sections, coatings and weld zones. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.
02 / Configuration
Key specifications.
Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.
Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.
Request a configuration| Loads | 0.3 / 0.5 / 1 / 3 / 5 / 10 kgf |
|---|---|
| Range | 5–5000 HV |
| Objectives | 10× / 40× |
| Magnification | 100× / 400× |
| Resolution | 0.1 HV |
| Max height | 200 mm |
| Dimensions | 620 × 330 × 650 mm |
| Weight | 75 kg |
Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.
03 / Where it fits
Applications and materials.
Hardness testing supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.
See how we support the installation- Thin sections
- Surface coatings
- Weld zones
- Carburised case depth
- Small components
- Microstructure hardness
Typical materials
If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.
Before you specify
HVS-10 — practical answers.
Still deciding? Send the material and the measurement target — we will reply with a practical next step.
Ask an application engineerWhat is the HVS-10 used for?
A digital Vickers tester for small parts, thin sections, coatings and weld zones. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.
Which materials and sample forms does the HVS-10 cover?
Typical materials: Steel, Cast iron, Aluminium, Copper alloys. Typical tasks: thin sections, surface coatings. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.
What are the key specifications of the HVS-10?
Starting point: loads 0.3 / 0.5 / 1 / 3 / 5 / 10 kgf; range 5–5000 HV; objectives 10× / 40×. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.
How is the configuration confirmed before ordering?
Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.
Put it to work
Configure HVS-10 around your material.
Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.