Micro-Vickers · 10–1000 gf / Hardness testing
HV-1000Micro-Vickers Hardness Tester
A micro-Vickers tester for small areas, thin sections and case-depth traverses.
HV-1000
YuBoo Instrument / Luoyang, China
01 / Why this configuration
Built around a real measurement decision.
The HV-1000 measures micro-Vickers hardness at 10–1000 gf. The XY stage and digital eyepiece support small parts, coatings and case-depth measurement.
A micro-Vickers tester for small areas, thin sections and case-depth traverses. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.
02 / Configuration
Key specifications.
Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.
Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.
Request a configuration| Loads | 10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000 gf |
|---|---|
| Range | 5–5000 HV |
| Objectives | 10× / 40× |
| Stage | 100 × 100 mm |
| Stage travel | 25 × 25 mm |
| Resolution | 0.1 HV |
| Dimensions | 530 × 290 × 490 mm |
| Weight | 45 kg |
Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.
03 / Where it fits
Applications and materials.
Hardness testing supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.
See how we support the installation- Case depth
- Coatings
- Thin sections
- Weld zones
- Small parts
- Microstructure hardness
Typical materials
If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.
Before you specify
HV-1000 — practical answers.
Still deciding? Send the material and the measurement target — we will reply with a practical next step.
Ask an application engineerWhat is the HV-1000 used for?
A micro-Vickers tester for small areas, thin sections and case-depth traverses. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.
Which materials and sample forms does the HV-1000 cover?
Typical materials: Steel, Cast iron, Aluminium, Copper alloys. Typical tasks: case depth, coatings. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.
What are the key specifications of the HV-1000?
Starting point: loads 10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000 gf; range 5–5000 HV; objectives 10× / 40×. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.
How is the configuration confirmed before ordering?
Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.
Put it to work
Configure HV-1000 around your material.
Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.