Manufacturer · Luoyang, ChinaExport & OEM support worldwide

sales@yuboo.com English

Brinell · 8-inch touchscreen / Hardness testing

HBS-3000BTTouchscreen Digital Brinell Hardness Tester

A touchscreen Brinell tester for castings, forgings and large parts.

Cast ironCarbon steelAlloy steelAluminiumCopper alloys Application-specific configuration
Hardness testing
HBS-3000BT
HBS-3000BT

Configuration and sensor set confirmed at quotation.

YuBoo Instrument / Luoyang, China

01 / Why this configuration

Built around a real measurement decision.

The HBS-3000BT uses a touchscreen and automatic load/hold/unload cycle. It covers 187.5–3000 kgf and stores grouped hardness results.

A touchscreen Brinell tester for castings, forgings and large parts. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.

8-inch touchscreen
187.5–3000 kgf
5–650 HBW
Automatic load cycle
280 mm max height
2000+ records

02 / Configuration

Key specifications.

Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.

Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.

Request a configuration
Loads187.5 / 250 / 500 / 750 / 1000 / 1500 / 3000 kgf
Range5–650 HBW
Max height280 mm
Throat165 mm
Display8-inch touchscreen
Dimensions760 × 268 × 930 mm
Weight210 kg

Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.

03 / Where it fits

Applications and materials.

Hardness testing supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.

See how we support the installation
  • Castings
  • Forgings
  • Large parts
  • Annealed steel
  • Incoming inspection

Typical materials

Cast ironCarbon steelAlloy steelAluminiumCopper alloys

If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.

Before you specify

HBS-3000BT — practical answers.

Still deciding? Send the material and the measurement target — we will reply with a practical next step.

Ask an application engineer
What is the HBS-3000BT used for?

A touchscreen Brinell tester for castings, forgings and large parts. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.

Which materials and sample forms does the HBS-3000BT cover?

Typical materials: Cast iron, Carbon steel, Alloy steel, Aluminium. Typical tasks: castings, forgings. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.

What are the key specifications of the HBS-3000BT?

Starting point: loads 187.5 / 250 / 500 / 750 / 1000 / 1500 / 3000 kgf; range 5–650 HBW; max height 280 mm. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.

How is the configuration confirmed before ordering?

Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.

Put it to work

Configure HBS-3000BT around your material.

Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.