Grinding · polishing · Ø200 mm / Metallography
MP-2BMetallographic Grinding & Polishing Machine
A double-disc grinding and polishing machine with servo drive and touchscreen control.
MP-2B
YuBoo Instrument / Luoyang, China
01 / Why this configuration
Built around a real measurement decision.
The MP-2B prepares metallographic specimens through coarse grinding, fine grinding, and polishing. Two 200 mm discs, servo drive, and programmable speed make the surface preparation repeatable.
A double-disc grinding and polishing machine with servo drive and touchscreen control. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.
02 / Configuration
Key specifications.
Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.
Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.
Request a configuration| Type | Double-disc bench-top |
|---|---|
| Disc diameter | Ø200 mm |
| Speed | 50–1500 r/min |
| Fixed speeds | 300 / 600 / 800 / 1000 r/min |
| Motor | 750 W AC servo |
| Control | Touchscreen |
| Power | 220 V / 50 Hz |
| Dimensions | 700 × 670 × 320 mm |
Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.
03 / Where it fits
Applications and materials.
Metallography supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.
See how we support the installation- Coarse grinding
- Fine grinding
- Metallographic polishing
- Cast iron graphite
- Coating cross-sections
- Microstructure preparation
Typical materials
If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.
Before you specify
MP-2B — practical answers.
Still deciding? Send the material and the measurement target — we will reply with a practical next step.
Ask an application engineerWhat is the MP-2B used for?
A double-disc grinding and polishing machine with servo drive and touchscreen control. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.
Which materials and sample forms does the MP-2B cover?
Typical materials: Carbon steel, Alloy steel, Cast iron, Aluminium. Typical tasks: coarse grinding, fine grinding. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.
What are the key specifications of the MP-2B?
Starting point: type Double-disc bench-top; disc diameter Ø200 mm; speed 50–1500 r/min. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.
How is the configuration confirmed before ordering?
Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.
Put it to work
Configure MP-2B around your material.
Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.