Cutting · Ø80 mm / Metallography
Q-80SMetallographic Specimen Cutting Machine
A bench-top abrasive cutter for metallographic specimens up to Ø80 mm.
Q-80S
YuBoo Instrument / Luoyang, China
01 / Why this configuration
Built around a real measurement decision.
The Q-80S cuts metallographic specimens with a handwheel-driven abrasive wheel. The large table and quick clamp hold irregular or bar stock securely, while the recirculating coolant keeps the cut cool.
A bench-top abrasive cutter for metallographic specimens up to Ø80 mm. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.
02 / Configuration
Key specifications.
Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.
Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.
Request a configuration| Type | Bench-top abrasive cutter |
|---|---|
| Maximum cut | Ø80 mm |
| Power | 3.0 kW / AC 380 V |
| Wheel speed | 2800 r/min |
| Wheel size | 250 × 2 × 32 mm |
| Table | 220 × 240 mm |
| Coolant tank | 25 L |
| Dimensions | 590 × 670 × 580 mm |
Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.
03 / Where it fits
Applications and materials.
Metallography supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.
See how we support the installation- Metallographic sectioning
- Cast iron and steel samples
- Aluminium and copper samples
- Weld cross-sections
- Heat-treated case depth
- Specimen preparation
Typical materials
If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.
Before you specify
Q-80S — practical answers.
Still deciding? Send the material and the measurement target — we will reply with a practical next step.
Ask an application engineerWhat is the Q-80S used for?
A bench-top abrasive cutter for metallographic specimens up to Ø80 mm. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.
Which materials and sample forms does the Q-80S cover?
Typical materials: Carbon steel, Alloy steel, Cast iron, Aluminium. Typical tasks: metallographic sectioning, cast iron and steel samples. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.
What are the key specifications of the Q-80S?
Starting point: type Bench-top abrasive cutter; maximum cut Ø80 mm; power 3.0 kW / AC 380 V. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.
How is the configuration confirmed before ordering?
Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.
Put it to work
Configure Q-80S around your material.
Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.