Mounting · Ø30 mm / Metallography
ZXQ-1SAutomatic Double-Head Mounting Press
An automatic double-head mounting press with heating, pressure, and water cooling.
ZXQ-1S
YuBoo Instrument / Luoyang, China
01 / Why this configuration
Built around a real measurement decision.
The ZXQ-1S mounts small or irregular specimens in thermosetting resin. Two mounting heads work independently, and the cycle handles heating, pressing, water cooling, and automatic stop.
An automatic double-head mounting press with heating, pressure, and water cooling. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.
02 / Configuration
Key specifications.
Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.
Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.
Request a configuration| Type | Automatic double-head mounting press |
|---|---|
| Mold size | Ø30 mm (Ø22/25/40/custom) |
| Heater | 220 V / 1500 W × 2 |
| Total power | 3200 W |
| Cooling | Water cooling |
| Control | Touchscreen |
| Dimensions | 650 × 500 × 550 mm |
| Net weight | 105 kg |
Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.
03 / Where it fits
Applications and materials.
Metallography supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.
See how we support the installation- Small specimen mounting
- Irregular specimen mounting
- Edge protection
- Metallographic preparation
- Failure analysis samples
- Quality laboratory routine
Typical materials
If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.
Before you specify
ZXQ-1S — practical answers.
Still deciding? Send the material and the measurement target — we will reply with a practical next step.
Ask an application engineerWhat is the ZXQ-1S used for?
An automatic double-head mounting press with heating, pressure, and water cooling. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.
Which materials and sample forms does the ZXQ-1S cover?
Typical materials: Steel, Cast iron, Aluminium, Copper alloys. Typical tasks: small specimen mounting, irregular specimen mounting. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.
What are the key specifications of the ZXQ-1S?
Starting point: type Automatic double-head mounting press; mold size Ø30 mm (Ø22/25/40/custom); heater 220 V / 1500 W × 2. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.
How is the configuration confirmed before ordering?
Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.
Put it to work
Configure ZXQ-1S around your material.
Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.