Rockwell · 8-inch touchscreen / Hardness testing
200HRS-150TTouchscreen Digital Rockwell Hardness Tester
A touchscreen Rockwell tester with automatic load cycle and temperature measurement.
200HRS-150T
Configuration and sensor set confirmed at quotation.
01 / Why this configuration
Built around a real measurement decision.
The 200HRS-150T uses an 8-inch touchscreen and automatic load, hold and unload cycle. It stores grouped results and displays hardness curves for batch control.
A touchscreen Rockwell tester with automatic load cycle and temperature measurement. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.
02 / Configuration
Key specifications.
Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.
Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.
Request a configuration| Preliminary load | 98.07 N |
|---|---|
| Total load | 588.4 / 980.7 / 1471 N |
| Scales | HRA / HRB / HRC |
| Resolution | 0.1 HR |
| Max height | 200 mm |
| Display | 8-inch touchscreen |
| Dimensions | 510 × 290 × 730 mm |
| Weight | 80 kg |
Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.
03 / Where it fits
Applications and materials.
Hardness testing supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.
See how we support the installation- Heat-treated parts
- Batch hardness control
- Hardened steel
- Bearing materials
- Incoming inspection
Typical materials
If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.
Before you specify
200HRS-150T — practical answers.
Still deciding? Send the material and the measurement target — we will reply with a practical next step.
Ask an application engineerWhat is the 200HRS-150T used for?
A touchscreen Rockwell tester with automatic load cycle and temperature measurement. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.
Which materials and sample forms does the 200HRS-150T cover?
Typical materials: Carbon steel, Alloy steel, Cast iron, Aluminium. Typical tasks: heat-treated parts, batch hardness control. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.
What are the key specifications of the 200HRS-150T?
Starting point: preliminary load 98.07 N; total load 588.4 / 980.7 / 1471 N; scales HRA / HRB / HRC. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.
How is the configuration confirmed before ordering?
Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.
Put it to work
Configure 200HRS-150T around your material.
Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.