Leeb · portable · 20 materials / Hardness testing
FZ210Portable Leeb Hardness Tester
A compact Leeb hardness tester for field and large-part inspection.
FZ210
Configuration and sensor set confirmed at quotation.
01 / Why this configuration
Built around a real measurement decision.
The FZ210 measures Leeb hardness and converts to HB, HRB, HRC, HV and HSD. The compact body and backlit display suit field and installed-part checks.
A compact Leeb hardness tester for field and large-part inspection. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.
02 / Configuration
Key specifications.
Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.
Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.
Request a configuration| Method | Leeb rebound |
|---|---|
| Range | 170–960 HLD |
| Accuracy | ±6 HLD |
| Conversion | HB, HRB, HRC, HV, HSD |
| Materials | 20 curves |
| Power | 3 × AAA |
| Dimensions | 152 × 83 × 27 mm |
| Weight | ≈190 g |
Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.
03 / Where it fits
Applications and materials.
Hardness testing supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.
See how we support the installation- Large components
- Installed parts
- Field inspection
- Weld zones
- Material sorting
Typical materials
If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.
Before you specify
FZ210 — practical answers.
Still deciding? Send the material and the measurement target — we will reply with a practical next step.
Ask an application engineerWhat is the FZ210 used for?
A compact Leeb hardness tester for field and large-part inspection. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.
Which materials and sample forms does the FZ210 cover?
Typical materials: Carbon steel, Alloy steel, Stainless steel, Cast iron. Typical tasks: large components, installed parts. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.
What are the key specifications of the FZ210?
Starting point: method Leeb rebound; range 170–960 HLD; accuracy ±6 HLD. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.
How is the configuration confirmed before ordering?
Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.
Put it to work
Configure FZ210 around your material.
Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.