Sand moisture · halogen heating / Foundry process control
DHSIntelligent Sand Moisture Meter
A halogen-heating moisture meter for fast, repeatable foundry sand testing.
DHS
YuBoo Instrument / Luoyang, China
01 / Why this configuration
Built around a real measurement decision.
The DHS measures sand moisture by halogen heating and continuous weighing. The 5-inch touchscreen shows moisture, dry-weight percentage and dry weight, and the result locks when the drying cycle is complete.
A halogen-heating moisture meter for fast, repeatable foundry sand testing. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.
02 / Configuration
Key specifications.
Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.
Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.
Request a configuration| Method | Halogen heating / loss on drying |
|---|---|
| Balance accuracy | 0.005 g |
| Maximum sample | 50 g |
| Heating range | 50–180 °C |
| Temperature tolerance | ±1 °C |
| Timer | 0–99 min, 1 min steps |
| Moisture range | 0–100% |
| Power | 220 V / 350 W |
Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.
03 / Where it fits
Applications and materials.
Foundry process control supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.
See how we support the installation- Foundry sand moisture
- Green sand control
- Moulding sand routine
- Incoming sand checks
- Sand-to-metal ratio control
- Laboratory documentation
Typical materials
If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.
Before you specify
DHS — practical answers.
Still deciding? Send the material and the measurement target — we will reply with a practical next step.
Ask an application engineerWhat is the DHS used for?
A halogen-heating moisture meter for fast, repeatable foundry sand testing. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.
Which materials and sample forms does the DHS cover?
Typical materials: Green sand, Resin sand, Core sand, Reclaimed sand. Typical tasks: foundry sand moisture, green sand control. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.
What are the key specifications of the DHS?
Starting point: method Halogen heating / loss on drying; balance accuracy 0.005 g; maximum sample 50 g. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.
How is the configuration confirmed before ordering?
Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.
Put it to work
Configure DHS around your material.
Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.