Sand specimen · filling / Foundry process control
SBTSand Loader
A standard six-mesh sand loader for uniform filling of compactability specimen tubes.
SBT
YuBoo Instrument / Luoyang, China
01 / Why this configuration
Built around a real measurement decision.
The SBT works with the hammer specimen machine. Sand is passed through a standard six-mesh sieve and loaded into the specimen tube in a repeatable way.
A standard six-mesh sand loader for uniform filling of compactability specimen tubes. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.
02 / Configuration
Key specifications.
Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.
Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.
Request a configuration| Sieve | Standard 6 mesh |
|---|---|
| Funnel diameter | 200 mm |
| Funnel height | 120 mm |
| Sieve-to-tube height | 140 mm |
| Application | Sand specimen filling |
Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.
03 / Where it fits
Applications and materials.
Foundry process control supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.
See how we support the installation- Compactability specimen filling
- Green sand preparation
- Moulding sand testing
- Sand laboratory routine
- Operator training
Typical materials
If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.
Before you specify
SBT — practical answers.
Still deciding? Send the material and the measurement target — we will reply with a practical next step.
Ask an application engineerWhat is the SBT used for?
A standard six-mesh sand loader for uniform filling of compactability specimen tubes. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.
Which materials and sample forms does the SBT cover?
Typical materials: Green sand, Clay-bonded sand, Core sand, Reclaimed sand. Typical tasks: compactability specimen filling, green sand preparation. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.
What are the key specifications of the SBT?
Starting point: sieve Standard 6 mesh; funnel diameter 200 mm; funnel height 120 mm. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.
How is the configuration confirmed before ordering?
Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.
Put it to work
Configure SBT around your material.
Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.