Sand specimen · compactability / Foundry process control
SACHammer Specimen Machine
Prepares standard green-sand specimens and measures compactability for the sand laboratory.
SAC
Configuration and sensor set confirmed at quotation.
01 / Why this configuration
Built around a real measurement decision.
The SAC prepares standard sand specimens for physical testing and measures compactability under a controlled drop. It is the starting point for the green-sand strength and permeability routine.
Prepares standard green-sand specimens and measures compactability for the sand laboratory. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.
02 / Configuration
Key specifications.
Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.
Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.
Request a configuration| Hammer weight | 6670 ±10 g |
|---|---|
| Drop height | 50 ±0.5 mm |
| Blows | 3 |
| Work input | 10 J |
| Compactability | 20–70% |
| Application | Green sand specimens |
Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.
03 / Where it fits
Applications and materials.
Foundry process control supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.
See how we support the installation- Green sand compactability
- Specimen preparation for strength tests
- Moulding sand control
- Incoming sand checks
- Sand laboratory routine
- Quality documentation
Typical materials
If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.
Before you specify
SAC — practical answers.
Still deciding? Send the material and the measurement target — we will reply with a practical next step.
Ask an application engineerWhat is the SAC used for?
Prepares standard green-sand specimens and measures compactability for the sand laboratory. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.
Which materials and sample forms does the SAC cover?
Typical materials: Green sand, Clay-bonded sand, Core sand, Reclaimed sand. Typical tasks: green sand compactability, specimen preparation for strength tests. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.
What are the key specifications of the SAC?
Starting point: hammer weight 6670 ±10 g; drop height 50 ±0.5 mm; blows 3. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.
How is the configuration confirmed before ordering?
Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.
Put it to work
Configure SAC around your material.
Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.