Clay content · automatic / Foundry process control
SXX-3SAutomatic Sand Washer
A programmable siphon sand washer for clay-content testing of raw and reclaimed sand.
SXX-3S
Configuration and sensor set confirmed at quotation.
01 / Why this configuration
Built around a real measurement decision.
The SXX-3S automates the sedimentation and siphon cycle used to determine clay content. It handles filling, agitation, settling, and draining on a programmed cycle.
A programmable siphon sand washer for clay-content testing of raw and reclaimed sand. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.
02 / Configuration
Key specifications.
Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.
Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.
Request a configuration| Method | Automatic sedimentation and siphon |
|---|---|
| Settling time | 10 min / 5 min cycles |
| Siphon height | 100 mm above water; 35 mm above cup |
| Power | 220 V / 50 Hz / ≤80 W |
| Application | Raw sand and reclaimed sand |
Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.
03 / Where it fits
Applications and materials.
Foundry process control supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.
See how we support the installation- Clay content of raw sand
- Reclaimed sand control
- Sand washing routine
- Incoming sand evaluation
- Moulding sand quality
Typical materials
If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.
Before you specify
SXX-3S — practical answers.
Still deciding? Send the material and the measurement target — we will reply with a practical next step.
Ask an application engineerWhat is the SXX-3S used for?
A programmable siphon sand washer for clay-content testing of raw and reclaimed sand. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.
Which materials and sample forms does the SXX-3S cover?
Typical materials: Raw sand, Reclaimed sand, Green sand, Core sand. Typical tasks: clay content of raw sand, reclaimed sand control. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.
What are the key specifications of the SXX-3S?
Starting point: method Automatic sedimentation and siphon; settling time 10 min / 5 min cycles; siphon height 100 mm above water; 35 mm above cup. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.
How is the configuration confirmed before ordering?
Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.
Put it to work
Configure SXX-3S around your material.
Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.