XRF / Mg–U coverage / Handheld series
K-5000TPortable Mg to U.
A portable XRF with Mg-to-U element coverage, a 270° rotating screen, and a large battery. Suited to alloy verification in the warehouse, at the machine, or on site.
K-5000T
Specification confirmed at quotation
01 / Why this model
One question, answered properly.
The K-5000T is for sites where the instrument travels more than the sample: a 270° rotating screen, a 9000 mAh battery and Mg-to-U coverage in a 1.7 kg body. It is the practical choice when one analyser has to serve warehouse, workshop and field.
Best forAlloy ID, precious metals, pressure vessels, scrap recycling, and aerospace material verification.
02 / Specification
Key numbers.
These are the figures that decide whether a reading is usable: spot size, element coverage, measurement time and excitation.
Send the material list and the decision the result has to support. We will confirm the configuration and the sample form.
Request a configuration| Method | XRF · Mg–U |
|---|---|
| Weight | 1.7 kg |
| Excitation | 50 kV · 200 µA Rh |
| Measurement | 1–60 s |
| Battery | 9000 mAh · 12 h |
| Size | 244 × 90 × 330 mm |
Indicative specification for comparison. The datasheet and acceptance criteria are confirmed with the quotation.
03 / Where it fits
Applications and materials.
Choose the model on the element set and the sample form, not on the brand. If the material list is not here, send it before committing.
See how handover and training work- Warehouse and workshop alloy identification
- Pressure-vessel, pipe and weld PMI
- Aerospace and automotive material verification
- Scrap recycling and grade sorting
- Field verification where laboratory access is limited
Typical materials
The rest of the series
Same question, different coverage.
Pick by element coverage and spot size first, then by speed, ergonomics and the service route in your country.
All handheld models| Model | Method | Best for | Detail |
|---|---|---|---|
| SciAps X-50 | XRF · 7 mm² SDD | Alloy ID, coatings, precious metals, and RoHS screening — not the choice when Mg, Al, Si, S, or P matter. | View |
| SciAps X-200 | XRF · 20 mm² SDD | Scrap sorting, PMI, and alloy identification where aluminium and a wider element set matter. | View |
| Y-300 | LIBS · 1064 nm | Aluminium grade ID, recycled aluminium sorting, and PMI of aluminium components. | View |
| Y-400 | LIBS · 1064 nm | Carbon verification in stainless, alloy, and carbon steels, plus incoming and PMI checks. | View |
| SciAps Z-903 | LIBS · 1064 nm | Lithium-bearing rocks, soils, ceramics, and geochemical exploration. | View |
Before you specify
K-5000T — practical answers.
Still deciding? Send the material and the measurement target — we will reply with a practical next step.
Ask an application engineerDoes it measure magnesium and aluminium?
Yes — it is specified for Mg-to-U coverage, so light-element alloy families are inside its range.
How long does the battery last?
The 9000 mAh pack is rated for up to about 12 hours of typical use; continuous measurement shortens that. A spare pack is recommended for full-day field work.
How does it differ from the X-series?
Different platform, same job. Choose on ergonomics, screen readability and the service route in your country — element set and spot size decide which readings are trustworthy.
Put it to work
Send the material, not just the model number.
Tell us the alloy or element set, the sample form and the decision the reading has to support. We will confirm whether K-5000T is the right instrument — and say so when it is not.