Manufacturer · Luoyang, ChinaExport & OEM support worldwide

sales@yuboo.com English

XRF / Alloy families / Handheld series

SciAps X-200Wider coverage, same body.

A faster SDD platform with a 6–50 kV tube for all alloy families, including aluminium. Built for scrap sorting, positive material identification, and high-throughput incoming inspection.

Aluminium alloysMagnesium alloysStainless steelAlloy steelNickel alloysTitanium
Handheld series
SciAps X-200
SciAps X-200 handheld analyser Specification confirmed at quotation

01 / Why this model

One question, answered properly.

The X-200 is the same platform with a wider question: it adds aluminium and the light elements the X-50 leaves out, using a 20 mm² SDD and a 6–50 kV tube. It is the model to take when scrap sorting and positive material identification run all day across mixed alloy families.

20 mm² SDD at 135 eV FWHM — roughly twice the speed of the X-50
6–50 kV, 200 µA tube with Rh / Au target for light-element work
Covers all alloy families including aluminium and magnesium
Built for continuous scrap sorting and high-throughput PMI
Same 1.4 kg platform, so operators can move between both models

Best forScrap sorting, PMI, and alloy identification where aluminium and a wider element set matter.

02 / Specification

Key numbers.

These are the figures that decide whether a reading is usable: spot size, element coverage, measurement time and excitation.

Send the material list and the decision the result has to support. We will confirm the configuration and the sample form.

Request a configuration
MethodXRF · 20 mm² SDD
Weight1.4 kg
Excitation6–50 kV · 200 µA
TargetRh / Au
Resolution135 eV FWHM
CoverageAll alloy families incl. Al

Indicative specification for comparison. The datasheet and acceptance criteria are confirmed with the quotation.

03 / Where it fits

Applications and materials.

Choose the model on the element set and the sample form, not on the brand. If the material list is not here, send it before committing.

See how handover and training work
  • High-throughput scrap sorting and grade separation
  • Positive material identification on pipe, plate, fittings and welds
  • Aluminium and magnesium alloy identification
  • Incoming inspection with a wide element set
  • Fabrication and pressure-vessel material verification

Typical materials

Aluminium alloysMagnesium alloysStainless steelAlloy steelNickel alloysTitaniumCopper alloysScrap mixtures
04

The rest of the series

Same question, different coverage.

Pick by element coverage and spot size first, then by speed, ergonomics and the service route in your country.

All handheld models
ModelMethodBest forDetail
SciAps X-50 XRF · 7 mm² SDD Alloy ID, coatings, precious metals, and RoHS screening — not the choice when Mg, Al, Si, S, or P matter. View
K-5000T XRF · Mg–U Alloy ID, precious metals, pressure vessels, scrap recycling, and aerospace material verification. View
Y-300 LIBS · 1064 nm Aluminium grade ID, recycled aluminium sorting, and PMI of aluminium components. View
Y-400 LIBS · 1064 nm Carbon verification in stainless, alloy, and carbon steels, plus incoming and PMI checks. View
SciAps Z-903 LIBS · 1064 nm Lithium-bearing rocks, soils, ceramics, and geochemical exploration. View

Before you specify

SciAps X-200 — practical answers.

Still deciding? Send the material and the measurement target — we will reply with a practical next step.

Ask an application engineer
What is the difference between the X-50 and X-200?

The X-50 uses a 7 mm² SDD with a 3.5 mm spot and covers Ti to Bi. The X-200 uses a 20 mm² SDD and a 6–50 kV tube, so it measures aluminium, magnesium and silicon and runs faster — with a larger spot and a higher price.

Can the X-200 replace a laboratory spectrometer?

No. Handheld XRF is a screening and sorting tool. Carbon, nitrogen, oxygen and trace-level specifications still need spark OES or combustion analysis.

What sample surface is needed?

A clean, flat area larger than the spot. Mill scale, paint, rust and grease should be removed — surface preparation is the most common cause of a wrong reading.

Put it to work

Send the material, not just the model number.

Tell us the alloy or element set, the sample form and the decision the reading has to support. We will confirm whether SciAps X-200 is the right instrument — and say so when it is not.