Manufacturer · Luoyang, ChinaExport & OEM support worldwide

sales@yuboo.com English

LIBS / Carbon in steel / Handheld series

Y-400Carbon in steel, handheld.

A carbon-capable LIBS for steel and special alloys. Carbon is measured in 6–8 seconds; other alloying elements are displayed in about one second. Carbon measurement uses argon.

Stainless steelCarbon steelAlloy steelDuplex steelsNickel alloysSpecial alloys
Handheld series
Y-400
Y-400 handheld analyser Specification confirmed at quotation

01 / Why this model

One question, answered properly.

The Y-400 is the handheld that measures carbon in steel — six to eight seconds for carbon, about one second for everything else. It closes the gap handheld XRF cannot: separating 304 from 316 is easy, confirming carbon level in stainless is not.

Carbon in 6–8 seconds; other alloying elements in about one second
Works on stainless, alloy and carbon steels, plus special alloys
Accepts block, chip and foil samples
Argon supply required for carbon measurement
Handheld format for warehouse and site verification

Best forCarbon verification in stainless, alloy, and carbon steels, plus incoming and PMI checks.

02 / Specification

Key numbers.

These are the figures that decide whether a reading is usable: spot size, element coverage, measurement time and excitation.

Send the material list and the decision the result has to support. We will confirm the configuration and the sample form.

Request a configuration
MethodLIBS · 1064 nm
Weight1.8 kg
Carbon6–8 s
Other elements≈ 1 s
BasesStainless · alloy · carbon steel
SampleBlock / chip / foil

Indicative specification for comparison. The datasheet and acceptance criteria are confirmed with the quotation.

03 / Where it fits

Applications and materials.

Choose the model on the element set and the sample form, not on the brand. If the material list is not here, send it before committing.

See how handover and training work
  • Carbon verification in stainless and carbon steels
  • L-grade and 316L / 304L confirmation
  • Incoming material and PMI checks in fabrication
  • Weld and heat-affected-zone carbon checks

Typical materials

Stainless steelCarbon steelAlloy steelDuplex steelsNickel alloysSpecial alloys
04

The rest of the series

Same question, different coverage.

Pick by element coverage and spot size first, then by speed, ergonomics and the service route in your country.

All handheld models
ModelMethodBest forDetail
SciAps X-50 XRF · 7 mm² SDD Alloy ID, coatings, precious metals, and RoHS screening — not the choice when Mg, Al, Si, S, or P matter. View
SciAps X-200 XRF · 20 mm² SDD Scrap sorting, PMI, and alloy identification where aluminium and a wider element set matter. View
K-5000T XRF · Mg–U Alloy ID, precious metals, pressure vessels, scrap recycling, and aerospace material verification. View
Y-300 LIBS · 1064 nm Aluminium grade ID, recycled aluminium sorting, and PMI of aluminium components. View
SciAps Z-903 LIBS · 1064 nm Lithium-bearing rocks, soils, ceramics, and geochemical exploration. View

Before you specify

Y-400 — practical answers.

Still deciding? Send the material and the measurement target — we will reply with a practical next step.

Ask an application engineer
Is argon really required?

Yes for carbon. The measurement runs in an argon-purged atmosphere; without it carbon results are not reliable. A small cylinder or site supply is enough for field work.

How does it compare with a spark OES?

The Y-400 gives carbon and alloy identification where the sample is, but a stationary OES (SDB-810/910) remains the reference for full chemistry, trace elements and repeatability. Many plants use both.

Can it test cast iron?

Carbon measurement on cast iron is possible, but graphite morphology and sampling method affect the result. Send the application and sample form before committing.

Put it to work

Send the material, not just the model number.

Tell us the alloy or element set, the sample form and the decision the reading has to support. We will confirm whether Y-400 is the right instrument — and say so when it is not.