Manufacturer · Luoyang, ChinaExport & OEM support worldwide

sales@yuboo.com English

XRF / Alloy screening / Handheld series

SciAps X-50Small-spot alloy ID.

A small-spot XRF for alloy identification where magnesium, aluminium, silicon, sulphur, and phosphorus are not required. Fast, non-destructive screening for incoming material, coatings, and precious metals.

Stainless steelAlloy steelNickel alloysCobalt alloysTitaniumCopper alloys
Handheld series
SciAps X-50
SciAps X-50 handheld analyser Specification confirmed at quotation

01 / Why this model

One question, answered properly.

The X-50 answers a narrow question well: which alloy is this? It keeps a 3.5 mm spot for welds, small fittings and finished parts, and stays out of the decision when magnesium, aluminium, silicon, sulphur or phosphorus matter — that job belongs to the X-200.

3.5 mm measurement spot for welds, small castings and finished parts
1.4 kg one-hand body — usable at the rack, in the warehouse or on site
Ti to Bi coverage including heavy elements such as W, Ta, Hf, Pb and Bi
Non-destructive: no sample preparation, no consumables, no argon
7 mm² SDD at 190 eV FWHM for short measurement times

Best forAlloy ID, coatings, precious metals, and RoHS screening — not the choice when Mg, Al, Si, S, or P matter.

02 / Specification

Key numbers.

These are the figures that decide whether a reading is usable: spot size, element coverage, measurement time and excitation.

Send the material list and the decision the result has to support. We will confirm the configuration and the sample form.

Request a configuration
MethodXRF · 7 mm² SDD
Weight1.4 kg
Excitation4 W · 40 kV Rh
Spot size3.5 mm
Resolution190 eV FWHM
CoverageTi–Bi and heavy elements

Indicative specification for comparison. The datasheet and acceptance criteria are confirmed with the quotation.

03 / Where it fits

Applications and materials.

Choose the model on the element set and the sample form, not on the brand. If the material list is not here, send it before committing.

See how handover and training work
  • Incoming alloy verification and grade confirmation
  • PMI where light elements (Mg, Al, Si, S, P) are not the question
  • Precious metal and jewellery alloy screening
  • Coating and plating chemistry checks
  • RoHS / ELV restricted-substance screening
  • Simple scrap grade sorting

Typical materials

Stainless steelAlloy steelNickel alloysCobalt alloysTitaniumCopper alloysPrecious metalsCoatingsElectronic scrap
04

The rest of the series

Same question, different coverage.

Pick by element coverage and spot size first, then by speed, ergonomics and the service route in your country.

All handheld models
ModelMethodBest forDetail
SciAps X-200 XRF · 20 mm² SDD Scrap sorting, PMI, and alloy identification where aluminium and a wider element set matter. View
K-5000T XRF · Mg–U Alloy ID, precious metals, pressure vessels, scrap recycling, and aerospace material verification. View
Y-300 LIBS · 1064 nm Aluminium grade ID, recycled aluminium sorting, and PMI of aluminium components. View
Y-400 LIBS · 1064 nm Carbon verification in stainless, alloy, and carbon steels, plus incoming and PMI checks. View
SciAps Z-903 LIBS · 1064 nm Lithium-bearing rocks, soils, ceramics, and geochemical exploration. View

Before you specify

SciAps X-50 — practical answers.

Still deciding? Send the material and the measurement target — we will reply with a practical next step.

Ask an application engineer
Does the X-50 measure aluminium or silicon?

No. It is specified for alloy identification where Mg, Al, Si, S and P are not required. For aluminium alloys, silicon or phosphorus, choose the X-200 or a laboratory OES.

Can it measure carbon in steel or cast iron?

No. Carbon sits below the practical range of handheld XRF. Carbon equivalent and carbon control need spark OES (SDB-810/910) or a carbon–sulphur analyser.

Do I need a radiation licence to use it?

Handheld XRF contains an X-ray tube and local requirements vary by country. We confirm the paperwork route for your market before shipping.

Put it to work

Send the material, not just the model number.

Tell us the alloy or element set, the sample form and the decision the reading has to support. We will confirm whether SciAps X-50 is the right instrument — and say so when it is not.