Mould surface · 980 g / Foundry process control
SYS-BGreen Sand Surface Hardness Tester
A portable gauge for checking the surface hardness of a green-sand mould.
SYS-B
YuBoo Instrument / Luoyang, China
01 / Why this configuration
Built around a real measurement decision.
The SYS-B presses a spring-loaded pin into the mould surface and displays a hardness reading. It is a quick check of ramming consistency across the mould.
A portable gauge for checking the surface hardness of a green-sand mould. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.
02 / Configuration
Key specifications.
Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.
Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.
Request a configuration| Maximum load | 980 g |
|---|---|
| Accuracy | ±1.5% |
| Working temperature | 5–50 °C |
| Display | Digital |
| Application | Green sand mould surface |
| Zero adjustment | Yes |
Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.
03 / Where it fits
Applications and materials.
Foundry process control supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.
See how we support the installation- Mould surface hardness
- Ramming consistency
- Green sand mould control
- Operator checks
- Casting defect investigation
Typical materials
If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.
Before you specify
SYS-B — practical answers.
Still deciding? Send the material and the measurement target — we will reply with a practical next step.
Ask an application engineerWhat is the SYS-B used for?
A portable gauge for checking the surface hardness of a green-sand mould. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.
Which materials and sample forms does the SYS-B cover?
Typical materials: Green sand, Clay-bonded moulds, Core surfaces. Typical tasks: mould surface hardness, ramming consistency. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.
What are the key specifications of the SYS-B?
Starting point: maximum load 980 g; accuracy ±1.5%; working temperature 5–50 °C. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.
How is the configuration confirmed before ordering?
Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.
Put it to work
Configure SYS-B around your material.
Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.