Hydraulic servo · 300 kN / Mechanical testing
WAW-300B300 kN Hydraulic Servo UTM
A 300 kN hydraulic servo UTM for high-capacity tensile, compression, and bending tests.
WAW-300B
YuBoo Instrument / Luoyang, China
01 / Why this configuration
Built around a real measurement decision.
The WAW-300B is a microcomputer-controlled electro-hydraulic servo universal testing machine. The hydraulic frame provides stable high-force loading for cast bars, reinforcing steel, and structural specimens.
A 300 kN hydraulic servo UTM for high-capacity tensile, compression, and bending tests. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.
02 / Configuration
Key specifications.
Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.
Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.
Request a configuration| Type | Hydraulic servo universal testing machine |
|---|---|
| Capacity | 300 kN |
| Loading | Electro-hydraulic servo |
| Tests | Tension, compression, bending |
| Control | Microcomputer controlled |
| Application | High-force metal specimens |
| Fixture | Configured to the sample |
| Output | Digital test records |
Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.
03 / Where it fits
Applications and materials.
Mechanical testing supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.
See how we support the installation- Rebar and steel bar testing
- Cast and forged specimen testing
- Compression tests
- Bending tests
- Structural material verification
- Quality documentation
Typical materials
If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.
Before you specify
WAW-300B — practical answers.
Still deciding? Send the material and the measurement target — we will reply with a practical next step.
Ask an application engineerWhat is the WAW-300B used for?
A 300 kN hydraulic servo UTM for high-capacity tensile, compression, and bending tests. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.
Which materials and sample forms does the WAW-300B cover?
Typical materials: Carbon steel, Alloy steel, Stainless steel, Cast iron. Typical tasks: rebar and steel bar testing, cast and forged specimen testing. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.
What are the key specifications of the WAW-300B?
Starting point: type Hydraulic servo universal testing machine; capacity 300 kN; loading Electro-hydraulic servo. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.
How is the configuration confirmed before ordering?
Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.
Put it to work
Configure WAW-300B around your material.
Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.