Electronic · 10 kN / Mechanical testing
WDW-10Double-Column Electronic UTM
A double-column electronic UTM for tensile, compression, and bending tests at 10 kN class.
WDW-10
YuBoo Instrument / Luoyang, China
01 / Why this configuration
Built around a real measurement decision.
The WDW-10 is a double-column electronic universal testing machine for routine mechanical testing. It handles tensile, compression, and bending work with a stable frame and microcomputer control.
A double-column electronic UTM for tensile, compression, and bending tests at 10 kN class. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.
02 / Configuration
Key specifications.
Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.
Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.
Request a configuration| Type | Electronic universal testing machine |
|---|---|
| Capacity | 10 kN |
| Frame | Double-column |
| Tests | Tension, compression, bending |
| Control | Microcomputer controlled |
| Application | Metal and non-metal specimens |
| Fixture | Configured to the standard |
| Output | Digital test records |
Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.
03 / Where it fits
Applications and materials.
Mechanical testing supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.
See how we support the installation- Tensile strength and elongation
- Compression testing
- Bending tests
- Welded joint checks
- Incoming material verification
- Laboratory quality control
Typical materials
If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.
Before you specify
WDW-10 — practical answers.
Still deciding? Send the material and the measurement target — we will reply with a practical next step.
Ask an application engineerWhat is the WDW-10 used for?
A double-column electronic UTM for tensile, compression, and bending tests at 10 kN class. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.
Which materials and sample forms does the WDW-10 cover?
Typical materials: Carbon steel, Stainless steel, Aluminium, Copper alloys. Typical tasks: tensile strength and elongation, compression testing. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.
What are the key specifications of the WDW-10?
Starting point: type Electronic universal testing machine; capacity 10 kN; frame Double-column. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.
How is the configuration confirmed before ordering?
Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.
Put it to work
Configure WDW-10 around your material.
Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.