Electronic · 300 kN / Mechanical testing
WDW-300300 kN Electronic UTM
A heavy-duty 300 kN electronic UTM for high-force tensile, compression, and bending tests.
WDW-300
YuBoo Instrument / Luoyang, China
01 / Why this configuration
Built around a real measurement decision.
The WDW-300 is a heavy-duty electronic universal testing machine for high-force mechanical tests. It is suited to large test bars, castings, and structural components where a stronger frame is required.
A heavy-duty 300 kN electronic UTM for high-force tensile, compression, and bending tests. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.
02 / Configuration
Key specifications.
Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.
Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.
Request a configuration| Type | Electronic universal testing machine |
|---|---|
| Capacity | 300 kN |
| Frame | Heavy-duty double-column |
| Tests | Tension, compression, bending |
| Control | Microcomputer controlled |
| Application | Large test bars and castings |
| Fixture | Configured to the sample |
| Output | Digital test records |
Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.
03 / Where it fits
Applications and materials.
Mechanical testing supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.
See how we support the installation- High-force tensile tests
- Cast and forged bar testing
- Compression and bending
- Structural component checks
- Incoming material verification
- Quality documentation
Typical materials
If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.
Before you specify
WDW-300 — practical answers.
Still deciding? Send the material and the measurement target — we will reply with a practical next step.
Ask an application engineerWhat is the WDW-300 used for?
A heavy-duty 300 kN electronic UTM for high-force tensile, compression, and bending tests. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.
Which materials and sample forms does the WDW-300 cover?
Typical materials: Carbon steel, Alloy steel, Stainless steel, Cast iron. Typical tasks: high-force tensile tests, cast and forged bar testing. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.
What are the key specifications of the WDW-300?
Starting point: type Electronic universal testing machine; capacity 300 kN; frame Heavy-duty double-column. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.
How is the configuration confirmed before ordering?
Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.
Put it to work
Configure WDW-300 around your material.
Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.