Electronic · 100 kN / Mechanical testing
WDW-100B100 kN Electronic UTM
A 100 kN class electronic UTM for higher-force tensile, compression, and bending tests.
WDW-100B
YuBoo Instrument / Luoyang, China
01 / Why this configuration
Built around a real measurement decision.
The WDW-100B is a 100 kN class electronic universal testing machine for higher-force mechanical testing. It is configured for standard test bars, welded joints, and finished components.
A 100 kN class electronic UTM for higher-force tensile, compression, and bending tests. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.
02 / Configuration
Key specifications.
Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.
Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.
Request a configuration| Type | Electronic universal testing machine |
|---|---|
| Capacity | 100 kN |
| Frame | Double-column |
| Tests | Tension, compression, bending |
| Control | Microcomputer controlled |
| Application | Test bars and finished parts |
| Fixture | Configured to the sample |
| Output | Digital test records |
Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.
03 / Where it fits
Applications and materials.
Mechanical testing supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.
See how we support the installation- Tensile tests on cast and wrought bars
- Yield and elongation
- Compression tests
- Bending and joint tests
- Incoming material arbitration
- Quality documentation
Typical materials
If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.
Before you specify
WDW-100B — practical answers.
Still deciding? Send the material and the measurement target — we will reply with a practical next step.
Ask an application engineerWhat is the WDW-100B used for?
A 100 kN class electronic UTM for higher-force tensile, compression, and bending tests. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.
Which materials and sample forms does the WDW-100B cover?
Typical materials: Carbon steel, Alloy steel, Stainless steel, Aluminium alloys. Typical tasks: tensile tests on cast and wrought bars, yield and elongation. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.
What are the key specifications of the WDW-100B?
Starting point: type Electronic universal testing machine; capacity 100 kN; frame Double-column. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.
How is the configuration confirmed before ordering?
Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.
Put it to work
Configure WDW-100B around your material.
Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.