Electronic · Tabletop / Mechanical testing
WDW-4Tabletop Electronic UTM
A tabletop electronic UTM for tensile, compression, and bending tests on small and medium samples.
WDW-4
YuBoo Instrument / Luoyang, China
01 / Why this configuration
Built around a real measurement decision.
The WDW-4 is a compact tabletop electronic universal testing machine. It brings controlled tensile, compression, and bending testing to a laboratory bench without the footprint of a larger frame.
A tabletop electronic UTM for tensile, compression, and bending tests on small and medium samples. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.
02 / Configuration
Key specifications.
Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.
Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.
Request a configuration| Type | Electronic universal testing machine |
|---|---|
| Frame | Tabletop |
| Tests | Tension, compression, bending |
| Control | Microcomputer controlled |
| Application | Small and medium samples |
| Fixture | Configured to the sample |
| Output | Digital test records |
| Configuration | Bench-top installation |
Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.
03 / Where it fits
Applications and materials.
Mechanical testing supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.
See how we support the installation- Small tensile specimens
- Component compression tests
- Three-point bending
- Incoming material checks
- R&D and quality control
- Finished-part verification
Typical materials
If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.
Before you specify
WDW-4 — practical answers.
Still deciding? Send the material and the measurement target — we will reply with a practical next step.
Ask an application engineerWhat is the WDW-4 used for?
A tabletop electronic UTM for tensile, compression, and bending tests on small and medium samples. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.
Which materials and sample forms does the WDW-4 cover?
Typical materials: Steel, Aluminium, Copper alloys, Plastics. Typical tasks: small tensile specimens, component compression tests. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.
What are the key specifications of the WDW-4?
Starting point: type Electronic universal testing machine; frame Tabletop; tests Tension, compression, bending. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.
How is the configuration confirmed before ordering?
Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.
Put it to work
Configure WDW-4 around your material.
Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.