Manufacturer · Luoyang, ChinaExport & OEM support worldwide

sales@yuboo.com English

Drying · room temp–300 °C / Foundry process control

IR OvenInfrared Drying Oven

A 300 °C infrared drying oven for sand specimens and moulding materials.

Green sandCore sandCoated sandCoatingsRaw sand Application-specific configuration
Foundry process control
IR Oven
Infrared drying oven for foundry sand specimens YuBoo Instrument / Luoyang, China

01 / Why this configuration

Built around a real measurement decision.

The infrared oven dries sand specimens and other moulding materials with digital temperature control and timed operation. The stainless-steel chamber is suited to routine foundry sample preparation.

A 300 °C infrared drying oven for sand specimens and moulding materials. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.

Room temperature to 300 °C
Stainless-steel chamber
Digital temperature control
0–8 h timer
350 × 350 × 350 mm chamber
For sand specimen drying

02 / Configuration

Key specifications.

Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.

Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.

Request a configuration
Temperature rangeRoom temp–300 °C
Stability≤±2 °C
Timer0–8 h / min / s
Chamber350 × 350 × 350 mm
PowerAC 220 V / ≤2 kW
ApplicationSand specimen drying

Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.

03 / Where it fits

Applications and materials.

Foundry process control supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.

See how we support the installation
  • Sand specimen drying
  • Moulding material preparation
  • Coating drying
  • Laboratory sample preparation
  • Foundry sand routine

Typical materials

Green sandCore sandCoated sandCoatingsRaw sand

If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.

Before you specify

IR Oven — practical answers.

Still deciding? Send the material and the measurement target — we will reply with a practical next step.

Ask an application engineer
What is the IR Oven used for?

A 300 °C infrared drying oven for sand specimens and moulding materials. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.

Which materials and sample forms does the IR Oven cover?

Typical materials: Green sand, Core sand, Coated sand, Coatings. Typical tasks: sand specimen drying, moulding material preparation. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.

What are the key specifications of the IR Oven?

Starting point: temperature range Room temp–300 °C; stability ≤±2 °C; timer 0–8 h / min / s. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.

How is the configuration confirmed before ordering?

Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.

Put it to work

Configure IR Oven around your material.

Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.