Manufacturer · Luoyang, ChinaExport & OEM support worldwide

sales@yuboo.com English

LOI · ash · 1300 °C / Foundry process control

SX-IIProgrammable Box Furnace

A 1300 °C programmable box furnace for loss on ignition, ash, and volatile content.

Foundry sandCoatingsBentoniteRaw materials Application-specific configuration
Foundry process control
SX-II
SX-II

Configuration and sensor set confirmed at quotation.

YuBoo Instrument / Luoyang, China

01 / Why this configuration

Built around a real measurement decision.

The SX-II is a bench-top box furnace for the thermal tests around foundry sand: loss on ignition, ash, and volatile matter. The controller supports programmed heating and timed alarms.

A 1300 °C programmable box furnace for loss on ignition, ash, and volatile content. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.

1300 °C maximum
Programmable heating
Digital over-temperature alarm
4 kW heating power
250 × 150 × 100 mm chamber
Foundry sand LOI

02 / Configuration

Key specifications.

Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.

Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.

Request a configuration
Maximum temperature1300 °C
Power4 kW
Voltage220 V / 50 Hz
Chamber250 × 150 × 100 mm
Heating time<100 min empty
ControlProgrammable digital controller
ApplicationLOI, ash, volatile content

Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.

03 / Where it fits

Applications and materials.

Foundry process control supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.

See how we support the installation
  • Loss on ignition
  • Ash content
  • Volatile matter
  • Sand and coating tests
  • Raw material evaluation
  • Laboratory thermal work

Typical materials

Foundry sandCoatingsBentoniteRaw materials

If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.

Before you specify

SX-II — practical answers.

Still deciding? Send the material and the measurement target — we will reply with a practical next step.

Ask an application engineer
What is the SX-II used for?

A 1300 °C programmable box furnace for loss on ignition, ash, and volatile content. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.

Which materials and sample forms does the SX-II cover?

Typical materials: Foundry sand, Coatings, Bentonite, Raw materials. Typical tasks: loss on ignition, ash content. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.

What are the key specifications of the SX-II?

Starting point: maximum temperature 1300 °C; power 4 kW; voltage 220 V / 50 Hz. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.

How is the configuration confirmed before ordering?

Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.

Put it to work

Configure SX-II around your material.

Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.