Manufacturer · Luoyang, ChinaExport & OEM support worldwide

sales@yuboo.com English

Compression · 0.3 / 0.1 class / Mechanical testing

Load MeterStandard Load Measuring Instrument

A compression-only load meter for verifying force on testing machines and compression fixtures.

Compression fixturesUniversal testing machinesTest framesLoad cells Application-specific configuration
Mechanical testing
Load Meter
Load Meter

Configuration and sensor set confirmed at quotation.

YuBoo Instrument / Luoyang, China

01 / Why this configuration

Built around a real measurement decision.

The standard load measuring instrument is a compression-only force verification set: sensor, indenter, connection cable and digital meter. It is used to check the load displayed by a testing machine or compression fixture before a test programme is released.

A compression-only load meter for verifying force on testing machines and compression fixtures. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.

Compression-only configuration
0.3 or 0.1 accuracy class
Sensor, indenter, cable and meter
4-wire or 6-wire shielded sensor cable
30-minute warm-up before zeroing
Optional flight case

02 / Configuration

Key specifications.

Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.

Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.

Request a configuration
TypeCompression only (single-pressure)
Accuracy class0.3 or 0.1
ComponentsSensor, indenter, connection cable, meter, manuals, certificate
Sensor cable4-wire or 6-wire shielded cable
Warm-up30 minutes before zeroing
ZeroMeter zero key before use
ConnectorDB9 meter end; aviation connector at sensor end
OptionalFlight case

Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.

03 / Where it fits

Applications and materials.

Mechanical testing supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.

See how we support the installation
  • Testing-machine load verification
  • Compression fixture checks
  • UTM acceptance checks
  • Periodic force verification
  • Laboratory quality control
  • Before a test programme

Typical materials

Compression fixturesUniversal testing machinesTest framesLoad cells

If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.

Before you specify

Load Meter — practical answers.

Still deciding? Send the material and the measurement target — we will reply with a practical next step.

Ask an application engineer
What is the Load Meter used for?

A compression-only load meter for verifying force on testing machines and compression fixtures. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.

Which materials and sample forms does the Load Meter cover?

Typical materials: Compression fixtures, Universal testing machines, Test frames, Load cells. Typical tasks: testing-machine load verification, compression fixture checks. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.

What are the key specifications of the Load Meter?

Starting point: type Compression only (single-pressure); accuracy class 0.3 or 0.1; components Sensor, indenter, connection cable, meter, manuals, certificate. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.

How is the configuration confirmed before ordering?

Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.

Put it to work

Configure Load Meter around your material.

Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.