Manufacturer · Luoyang, ChinaExport & OEM support worldwide

sales@yuboo.com English

Bending · Ø6–40 mm / Mechanical testing

GW-40CRebar Bending Testing Machine

A dedicated cold-bending and reverse-bending tester for reinforcing steel.

Reinforcing steelCarbon steel barsLow-alloy steelWelded rebarConstruction steel Application-specific configuration
Mechanical testing
GW-40C
GW-40C rebar bending testing machine YuBoo Instrument / Luoyang, China

01 / Why this configuration

Built around a real measurement decision.

The GW-40C performs cold-bending and reverse-bending tests on reinforcing steel bars. The bending angle is set directly, so the operator can follow the required bend and inspect the outside of the bend without a separate fixture setup.

A dedicated cold-bending and reverse-bending tester for reinforcing steel. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.

Ø6–40 mm rebar range
Forward and reverse bending to 180°
Direct bending-angle setting
Compact floor-standing frame
Low-noise drive
Installation and operator training

02 / Configuration

Key specifications.

Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.

Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.

Request a configuration
TestCold bending and reverse bending
Rebar diameterØ6–40 mm
Forward bend0–180°, adjustable
Reverse bend0–180°, adjustable
Table speed1.4 r/min
Motor1.5 kW
Dimensions1200 × 750 × 1000 mm
Weight700 kg

Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.

03 / Where it fits

Applications and materials.

Mechanical testing supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.

See how we support the installation
  • Rebar bend and rebend tests
  • Steel plant finished-bar inspection
  • Construction material verification
  • Welded reinforcement checks
  • Incoming steel inspection
  • Quality documentation

Typical materials

Reinforcing steelCarbon steel barsLow-alloy steelWelded rebarConstruction steel

If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.

Before you specify

GW-40C — practical answers.

Still deciding? Send the material and the measurement target — we will reply with a practical next step.

Ask an application engineer
What is the GW-40C used for?

A dedicated cold-bending and reverse-bending tester for reinforcing steel. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.

Which materials and sample forms does the GW-40C cover?

Typical materials: Reinforcing steel, Carbon steel bars, Low-alloy steel, Welded rebar. Typical tasks: rebar bend and rebend tests, steel plant finished-bar inspection. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.

What are the key specifications of the GW-40C?

Starting point: test Cold bending and reverse bending; rebar diameter Ø6–40 mm; forward bend 0–180°, adjustable. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.

How is the configuration confirmed before ordering?

Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.

Put it to work

Configure GW-40C around your material.

Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.