Charpy impact · 300 J / Mechanical testing
JB-W300APendulum Impact Testing Machine
A microcomputer-controlled pendulum impact tester for Charpy impact energy and toughness.
JB-W300A
YuBoo Instrument / Luoyang, China
01 / Why this configuration
Built around a real measurement decision.
The JB-W300A measures the energy absorbed by a notched metal specimen under impact. Lift, impact, and release are automated, with results shown on both the dial and the computer.
A microcomputer-controlled pendulum impact tester for Charpy impact energy and toughness. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.
02 / Configuration
Key specifications.
Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.
Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.
Request a configuration| Method | Pendulum impact / Charpy |
|---|---|
| Maximum energy | 300 J |
| Pendulum | 150 J |
| Standards | GB/T 3038-2002; GB/T 229-2020 |
| Display | Dial + computer |
| Control | Automatic and manual hand box |
| Application | Metals and castings |
| Output | Impact energy and toughness records |
Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.
03 / Where it fits
Applications and materials.
Mechanical testing supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.
See how we support the installation- Charpy impact testing of metals
- Weld and heat-affected zone checks
- Cast and forged material toughness
- Incoming material verification
- Heat-treatment comparison
- Quality documentation
Typical materials
If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.
Before you specify
JB-W300A — practical answers.
Still deciding? Send the material and the measurement target — we will reply with a practical next step.
Ask an application engineerWhat is the JB-W300A used for?
A microcomputer-controlled pendulum impact tester for Charpy impact energy and toughness. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.
Which materials and sample forms does the JB-W300A cover?
Typical materials: Carbon steel, Alloy steel, Stainless steel, Cast iron. Typical tasks: charpy impact testing of metals, weld and heat-affected zone checks. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.
What are the key specifications of the JB-W300A?
Starting point: method Pendulum impact / Charpy; maximum energy 300 J; pendulum 150 J. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.
How is the configuration confirmed before ordering?
Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.
Put it to work
Configure JB-W300A around your material.
Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.