Specimen preparation · U2 / V2 / Mechanical testing
LY71-UVImpact Specimen Notch Broaching Machine
A hydraulic broaching machine for U2 and V2 notches in Charpy impact specimens.
LY71-UV
YuBoo Instrument / Luoyang, China
01 / Why this configuration
Built around a real measurement decision.
The LY71-UV prepares impact specimen notches in one hydraulic draw. It is the specimen-preparation companion to a pendulum impact tester, producing U2 or V2 notches to the required geometry.
A hydraulic broaching machine for U2 and V2 notches in Charpy impact specimens. The final specification is matched to the material range, sample form, and reporting requirement of your laboratory or production line.
02 / Configuration
Key specifications.
Use these as a starting point. Utility requirements, calibration ranges, and acceptance criteria are confirmed against the final configuration.
Have the material list or a drawing? Send it with the application so the configuration can be reviewed properly.
Request a configuration| Method | Hydraulic broaching |
|---|---|
| Notch type | U2 / V2 |
| Specimen | 55 × 10 × 10 mm |
| Cutting speed | 2.6 m/min |
| Stroke | 350 mm |
| Dimensions | 460 × 610 × 1400 mm |
| Standards | GB/T 229-2020; ISO 148-2; ASTM E23 |
| Application | Charpy specimen preparation |
Indicative configuration information. Final datasheet and performance specification are issued with the quotation and confirmed at order.
03 / Where it fits
Applications and materials.
Mechanical testing supports decisions across incoming material, production control, and final verification. The right method depends on the question the result has to answer.
See how we support the installation- Charpy specimen notch preparation
- U2 and V2 notch machining
- Impact test sample batches
- Laboratory sample preparation
- Weld and heat-treatment specimens
- Quality-control specimen records
Typical materials
If your alloy or sample form is not listed, send the details. Configuration is not limited to the examples shown here — but every recommendation should be checked against the actual material and measurement target.
Before you specify
LY71-UV — practical answers.
Still deciding? Send the material and the measurement target — we will reply with a practical next step.
Ask an application engineerWhat is the LY71-UV used for?
A hydraulic broaching machine for U2 and V2 notches in Charpy impact specimens. The configuration is matched to the material range, sample form and reporting requirement of the laboratory or production line.
Which materials and sample forms does the LY71-UV cover?
Typical materials: Carbon steel, Alloy steel, Stainless steel, Cast iron. Typical tasks: charpy specimen notch preparation, u2 and v2 notch machining. If the material or sample form is not listed, send the details before committing — the configuration is not limited to the examples shown.
What are the key specifications of the LY71-UV?
Starting point: method Hydraulic broaching; notch type U2 / V2; specimen 55 × 10 × 10 mm. These figures are indicative; utility requirements, calibration ranges and acceptance criteria are confirmed with the final configuration.
How is the configuration confirmed before ordering?
Send the material list, the sample form, the standard and the decision the result has to support. We confirm the configuration in the quotation, and a sample test can be arranged where the result is critical.
Put it to work
Configure LY71-UV around your material.
Send the alloy, sample form, elements of interest, and the decision the result needs to support. We will recommend a configuration and confirm the next step.